[PATCH 00/14] Add A83T clk, r_pio, mmc rsb support

@@ -20,6 +20,7 @@ Required properties:
   "allwinner,sun9i-a80-pinctrl"
   "allwinner,sun9i-a80-r-pinctrl"
   "allwinner,sun8i-a83t-pinctrl"
+  "allwinner,sun8i-a83t-r-pinctrl"
   "allwinner,sun8i-h3-pinctrl"
 
 - reg: Should contain the register physical address and length for the

@@ -46,6 +46,11 @@ config PINCTRL_SUN8I_A83T
 	def_bool MACH_SUN8I
 	select PINCTRL_SUNXI_COMMON
 
+config PINCTRL_SUN8I_A83T_R
+	def_bool MACH_SUN8I
+	depends on RESET_CONTROLLER
+	select PINCTRL_SUNXI_COMMON
+
 config PINCTRL_SUN8I_A23_R
 	def_bool MACH_SUN8I
 	depends on RESET_CONTROLLER

@@ -13,6 +13,7 @@ obj-$(CONFIG_PINCTRL_SUN8I_A23)		+= pinctrl-sun8i-a23.o
 obj-$(CONFIG_PINCTRL_SUN8I_A23_R)	+= pinctrl-sun8i-a23-r.o
 obj-$(CONFIG_PINCTRL_SUN8I_A33)		+= pinctrl-sun8i-a33.o
 obj-$(CONFIG_PINCTRL_SUN8I_A83T)	+= pinctrl-sun8i-a83t.o
+obj-$(CONFIG_PINCTRL_SUN8I_A83T_R)	+= pinctrl-sun8i-a83t-r.o
 obj-$(CONFIG_PINCTRL_SUN8I_H3)		+= pinctrl-sun8i-h3.o
 obj-$(CONFIG_PINCTRL_SUN9I_A80)		+= pinctrl-sun9i-a80.o
 obj-$(CONFIG_PINCTRL_SUN9I_A80_R)	+= pinctrl-sun9i-a80-r.o

@@ -0,0 +1,119 @@
+/*
+ * Allwinner A83T SoCs special pins pinctrl driver.
+ *
+ * Copyright (C) 2016 Vishnu Patekar
+ * Vishnu Patekar <vishnupatekar0510@gmail.com>
+ *
+ * Based on pinctrl-sun8i-a23.c, which is:
+ * Copyright (C) 2014 Chen-Yu Tsai <wens@csie.org>
+ * Copyright (C) 2014 Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/reset.h>
+
+#include "pinctrl-sunxi.h"
+
+static const struct sunxi_desc_pin sun8i_a83t_r_pins[] = {
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 0),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "s_rsb"),		/* SCK */
+		  SUNXI_FUNCTION(0x3, "s_twi"),		/* SCK */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 0)),	/* PL_EINT0 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 1),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "s_rsb"),		/* SDA */
+		  SUNXI_FUNCTION(0x3, "s_twi"),		/* SDA */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 1)),	/* PL_EINT1 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 2),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "s_uart"),	/* TX */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 2)),	/* PL_EINT2 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 3),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "s_uart"),	/* RX */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 3)),	/* PL_EINT3 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 4),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "s_jtag"),	/* MS */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 4)),	/* PL_EINT4 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 5),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "s_jtag"),	/* CK */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 5)),	/* PL_EINT5 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 6),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "s_jtag"),	/* DO */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 6)),	/* PL_EINT6 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 7),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "s_jtag"),	/* DI */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 7)),	/* PL_EINT7 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 8),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "s_twi"),		/* SCK */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 8)),	/* PL_EINT8 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 9),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "s_twi"),		/* SDA */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 9)),	/* PL_EINT9 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 10),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "s_pwm"),
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 10)),	/* PL_EINT10 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 11),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 11)),	/* PL_EINT11 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 12),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "s_cir"),		/* RX */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 11)),	/* PL_EINT12 */
+};
+
+static const struct sunxi_pinctrl_desc sun8i_a83t_r_pinctrl_data = {
+	.pins = sun8i_a83t_r_pins,
+	.npins = ARRAY_SIZE(sun8i_a83t_r_pins),
+	.pin_base = PL_BASE,
+	.irq_banks = 1,
+};
+
+static int sun8i_a83t_r_pinctrl_probe(struct platform_device *pdev)
+{
+	return sunxi_pinctrl_init(pdev, &sun8i_a83t_r_pinctrl_data);
+}
+
+static const struct of_device_id sun8i_a83t_r_pinctrl_match[] = {
+	{ .compatible = "allwinner,sun8i-a83t-r-pinctrl", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, sun8i_a83t_r_pinctrl_match);
+
+static struct platform_driver sun8i_a83t_r_pinctrl_driver = {
+	.probe	= sun8i_a83t_r_pinctrl_probe,
+	.driver	= {
+		.name		= "sun8i-a83t-r-pinctrl",
+		.of_match_table	= sun8i_a83t_r_pinctrl_match,
+	},
+};
+module_platform_driver(sun8i_a83t_r_pinctrl_driver);

@@ -59,6 +59,7 @@ Required properties:
 	"allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31
 	"allwinner,sun8i-a23-apb2-gates-clk" - for the APB2 gates on A23
 	"allwinner,sun8i-h3-bus-gates-clk" - for the bus gates on H3
+	"allwinner,sun8i-a83t-bus-gates-clk" - for the bus gates on A83T
 	"allwinner,sun9i-a80-apbs-gates-clk" - for the APBS gates on A80
 	"allwinner,sun4i-a10-dram-gates-clk" - for the DRAM gates on A10
 	"allwinner,sun5i-a13-mbus-clk" - for the MBUS clock on A13

@@ -109,3 +109,5 @@ err_unmap:
 
 CLK_OF_DECLARE(sun8i_h3_bus_gates, "allwinner,sun8i-h3-bus-gates-clk",
 	       sun8i_h3_bus_gates_init);
+CLK_OF_DECLARE(sun8i_a83t_bus_gates, "allwinner,sun8i-a83t-bus-gates-clk",
+	       sun8i_h3_bus_gates_init);

@@ -29,6 +29,7 @@ Required properties:
 	"allwinner,sun6i-a31-ar100-clk" - for the AR100 on A31
 	"allwinner,sun9i-a80-cpus-clk" - for the CPUS on A80
 	"allwinner,sun6i-a31-ahb1-clk" - for the AHB1 clock on A31
+	"allwinner,sun8i-a83t-ahb1-clk" - for the AHB1 clock on A83T
 	"allwinner,sun8i-h3-ahb2-clk" - for the AHB2 clock on H3
 	"allwinner,sun6i-a31-ahb1-gates-clk" - for the AHB1 gates on A31
 	"allwinner,sun8i-a23-ahb1-gates-clk" - for the AHB1 gates on A23

@@ -344,6 +344,67 @@ static void sun6i_ahb1_recalc(struct factors_request *req)
 	req->rate >>= req->p;
 }
 
+
+#define SUN8I_A83T_AHB1_PARENT_PLL6	2
+/**
+ * sun8i_a83t_get_ahb_factors() - calculates m, p factors for AHB
+ * AHB rate is calculated as follows
+ * rate = parent_rate >> p
+ *
+ * if parent is pll6, then
+ * parent_rate = pll6 rate / (m + 1)
+ */
+
+static void sun8i_a83t_get_ahb1_factors(struct factors_request *req)
+{
+	u8 div, calcp, calcm = 1;
+
+	/*
+	 * clock can only divide, so we will never be able to achieve
+	 * frequencies higher than the parent frequency
+	 */
+	if (req->parent_rate && req->rate > req->parent_rate)
+		req->rate = req->parent_rate;
+
+	div = DIV_ROUND_UP(req->parent_rate, req->rate);
+
+	/* calculate pre-divider if parent is pll6 */
+	if (req->parent_index >= SUN8I_A83T_AHB1_PARENT_PLL6) {
+		if (div < 4)
+			calcp = 0;
+		else if (div / 2 < 4)
+			calcp = 1;
+		else if (div / 4 < 4)
+			calcp = 2;
+		else
+			calcp = 3;
+
+		calcm = DIV_ROUND_UP(div, 1 << calcp);
+	} else {
+		calcp = __roundup_pow_of_two(div);
+		calcp = calcp > 3 ? 3 : calcp;
+	}
+
+	req->rate = (req->parent_rate / calcm) >> calcp;
+	req->p = calcp;
+	req->m = calcm - 1;
+}
+
+/**
+ * sun8i_a83t_ahb1_recalc() - calculates AHB clock rate from m, p factors and
+ *			 parent index
+ */
+static void sun8i_a83t_ahb1_recalc(struct factors_request *req)
+{
+	req->rate = req->parent_rate;
+
+	/* apply pre-divider first if parent is pll6 */
+	if (req->parent_index >= SUN6I_AHB1_PARENT_PLL6)
+		req->rate /= req->m + 1;
+
+	/* clk divider */
+	req->rate >>= req->p;
+}
 /**
  * sun4i_get_apb1_factors() - calculates m, p factors for APB1
  * APB1 rate is calculated as follows

@@ -555,6 +616,14 @@ static const struct factors_data sun6i_ahb1_data __initconst = {
 	.recalc = sun6i_ahb1_recalc,
 };
 
+static const struct factors_data sun8i_a83t_ahb1_data __initconst = {
+	.mux = 12,
+	.muxmask = BIT(1) | BIT(0),
+	.table = &sun6i_ahb1_config,
+	.getter = sun8i_a83t_get_ahb1_factors,
+	.recalc = sun8i_a83t_ahb1_recalc,
+};
+
 static const struct factors_data sun4i_apb1_data __initconst = {
 	.mux = 24,
 	.muxmask = BIT(1) | BIT(0),

@@ -592,6 +661,12 @@ static void __init sun6i_ahb1_clk_setup(struct device_node *node)
 CLK_OF_DECLARE(sun6i_a31_ahb1, "allwinner,sun6i-a31-ahb1-clk",
 	       sun6i_ahb1_clk_setup);
 
+static void __init sun8i_a83t_ahb1_clk_setup(struct device_node *node)
+{
+	sunxi_factors_clk_setup(node, &sun8i_a83t_ahb1_data);
+}
+CLK_OF_DECLARE(sun8i_a83t_ahb1, "allwinner,sun8i-a83t-ahb1-clk",
+	       sun8i_a83t_ahb1_clk_setup);
 
 /**
  * sunxi_mux_clk_setup() - Setup function for muxes

@@ -49,6 +49,7 @@ Required properties:
 	"allwinner,sun8i-a23-apb0-gates-clk" - for the APB0 gates on A23
 	"allwinner,sun9i-a80-apb0-gates-clk" - for the APB0 gates on A80
 	"allwinner,sun4i-a10-apb1-clk" - for the APB1 clock
+	"allwinner,sun8i-a83t-apb1-clk" - for the APB1 clock on A83T
 	"allwinner,sun9i-a80-apb1-clk" - for the APB1 bus clock on A80
 	"allwinner,sun4i-a10-apb1-gates-clk" - for the APB1 gates on A10
 	"allwinner,sun5i-a13-apb1-gates-clk" - for the APB1 gates on A13

@@ -772,6 +772,22 @@ static const struct div_data sun4i_apb0_data __initconst = {
 	.table	= sun4i_apb0_table,
 };
 
+
+static const struct clk_div_table sun8i_a83t_apb1_table[] __initconst = {
+	{ .val = 0, .div = 1 },
+	{ .val = 1, .div = 2 },
+	{ .val = 2, .div = 3 },
+	{ .val = 3, .div = 4 },
+	{ } /* sentinel */
+};
+
+static const struct div_data sun8i_a83t_apb1_data __initconst = {
+	.shift	= 8,
+	.pow	= 0,
+	.width	= 2,
+	.table	= sun8i_a83t_apb1_table,
+};
+
 static void __init sunxi_divider_clk_setup(struct device_node *node,
 					   struct div_data *data)
 {

@@ -1027,6 +1043,7 @@ static const struct of_device_id clk_div_match[] __initconst = {
 	{.compatible = "allwinner,sun8i-a23-axi-clk", .data = &sun8i_a23_axi_data,},
 	{.compatible = "allwinner,sun4i-a10-ahb-clk", .data = &sun4i_ahb_data,},
 	{.compatible = "allwinner,sun4i-a10-apb0-clk", .data = &sun4i_apb0_data,},
+	{.compatible = "allwinner,sun8i-a83t-apb1-clk", .data = &sun8i_a83t_apb1_data,},
 	{}
 };
 

@@ -118,6 +118,7 @@
 		#size-cells = <1>;
 		ranges;
 
+		/* TODO: PRCM block has a mux for this. */
 		osc24M: osc24M_clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";

@@ -125,11 +126,25 @@
 			clock-output-names = "osc24M";
 		};
 
-		osc32k: osc32k_clk {
+		/*
+		 * This is called "internal OSC" in some places.
+		 * It is an internal RC-based oscillator.
+		 * TODO: Its controls are in the PRCM block.
+		 */
+		osc16M: osc16M_clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-			clock-output-names = "osc32k";
+			clock-frequency = <16000000>;
+			clock-output-names = "osc16M";
+		};
+
+		osc16Md512: osc16Md512_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <512>;
+			clock-mult = <1>;
+			clocks = <&osc16M>;
+			clock-output-names = "osc16Md512";
 		};
 	};
 

@@ -146,6 +146,98 @@
 			clocks = <&osc16M>;
 			clock-output-names = "osc16Md512";
 		};
+
+
+		pll6: clk at 01c20028 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun9i-a80-pll4-clk";
+			reg = <0x01c20028 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll6";
+		};
+
+		pll6d2: pll6d2_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <2>;
+			clock-mult = <1>;
+			clocks = <&pll6>;
+			clock-output-names = "pll6d2";
+		};
+
+		ahb1: ahb1_clk at 01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun8i-a83t-ahb1-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&osc16Md512>, <&osc24M>, <&pll6>, <&pll6>;
+			clock-output-names = "ahb1";
+		};
+
+		ahb2: ahb2_clk at 01c2005c {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun8i-h3-ahb2-clk";
+			reg = <0x01c2005c 0x4>;
+			clocks = <&ahb1>, <&pll6d2>;
+			clock-output-names = "ahb2";
+		};
+
+		apb1: apb1_clk at 01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun8i-a83t-apb1-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&ahb1>;
+			clock-output-names = "apb1";
+		};
+
+		apb2: clk at 01c20058 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-apb1-clk";
+			reg = <0x01c20058 0x4>;
+			clocks = <&osc16Md512>, <&osc24M>, <&pll6>, <&pll6>;
+			clock-output-names = "apb2";
+		};
+
+		bus_gates: clk at 01c20060 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun8i-a83t-bus-gates-clk";
+			reg = <0x01c20060 0x10>;
+			clocks = <&ahb1>, <&ahb2>, <&apb1>, <&apb2>;
+			clock-names = "ahb1", "ahb2", "apb1", "apb2";
+			clock-indices = <1>, <5>, <6>,
+					<8>, <9>, <10>,
+					<13>, <14>, <17>,
+					<19>, <20>,
+					<21>, <24>,
+					<26>, <27>,
+					<29>, <32>,
+					<36>, <37>,
+					<40>, <43>,
+					<44>, <52>, <53>,
+					<54>, <65>,
+					<69>, <76>, <77>,
+					<78>, <79>, <96>,
+					<97>, <98>,
+					<112>, <113>,
+					<114>, <115>,
+					<116>;
+			clock-output-names = "bus_mipidsi", "bus_ss", "bus_dma",
+					     "bus_mmc0", "bus_mmc1", "bus_mmc2",
+					     "bus_nand", "bus_sdram", "bus_emac",
+					     "bus_hstimer", "bus_spi0",
+					     "bus_spi1", "bus_usb_drd",
+					     "bus_ehci0", "bus_ehci1",
+					     "bus_ohci0", "bus_ve",
+					     "bus_lcd0", "bus_lcd1",
+					     "bus_csi", "bus_hdmi",
+					     "bus_de", "bus_gpu", "bus_msgbox",
+					     "bus_spinlock", "bus_owa",
+					     "bus_pio", "bus_i2s0", "bus_i2s1",
+					     "bus_i2s2", "bus_tdm", "bus_i2c0",
+					     "bus_i2c1", "bus_i2c2",
+					     "bus_uart0", "bus_uart1",
+					     "bus_uart2", "bus_uart3",
+					     "bus_uart4";
+		};
 	};
 
 	soc {

@@ -160,7 +252,7 @@
 				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x01c20800 0x400>;
-			clocks = <&osc24M>;
+			clocks = <&bus_gates 69>;
 			gpio-controller;
 			interrupt-controller;
 			#interrupt-cells = <3>;

@@ -189,6 +281,36 @@
 			};
 		};
 
+		ahb_reset0: reset at 01c202c0 {
+			reg = <0x01c202c0 0x4>;
+			compatible = "allwinner,sun6i-a31-clock-reset";
+			#reset-cells = <1>;
+		};
+
+		ahb_reset1: reset at 01c202c4 {
+			reg	 = <0x01c202c4 0x4>;
+			compatible = "allwinner,sun6i-a31-clock-reset";
+			#reset-cells = <1>;
+		};
+
+		ahb_reset2: reset at 01c202c8 {
+			reg = <0x01c202c8 0x4>;
+			compatible = "allwinner,sun6i-a31-clock-reset";
+			#reset-cells = <1>;
+		};
+
+		apb1_reset: reset at 01c202d0 {
+			reg = <0x01c202d0 0x4>;
+			compatible = "allwinner,sun6i-a31-clock-reset";
+			#reset-cells = <1>;
+		};
+
+		apb2_reset: reset at 01c202d8 {
+			reg = <0x01c202d8 0x4>;
+			compatible = "allwinner,sun6i-a31-clock-reset";
+			#reset-cells = <1>;
+		};
+
 		timer at 01c20c00 {
 			compatible = "allwinner,sun4i-a10-timer";
 			reg = <0x01c20c00 0xa0>;

@@ -210,7 +332,8 @@
 			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&osc24M>;
+			clocks = <&bus_gates 112>;
+			resets = <&apb2_reset 16>;
 			status = "disabled";
 		};
 

@@ -238,6 +238,36 @@
 					     "bus_uart2", "bus_uart3",
 					     "bus_uart4";
 		};
+
+		mmc0_clk: clk at 01c20088 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c20088 0x4>;
+			clocks = <&osc24M>, <&pll6>;
+			clock-output-names = "mmc0",
+					     "mmc0_output",
+					     "mmc0_sample";
+		};
+
+		mmc1_clk: clk at 01c2008c {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c2008c 0x4>;
+			clocks = <&osc24M>, <&pll6>;
+			clock-output-names = "mmc1",
+					     "mmc1_output",
+					     "mmc1_sample";
+		};
+
+		mmc2_clk: clk at 01c20090 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c20090 0x4>;
+			clocks = <&osc24M>, <&pll6>;
+			clock-output-names = "mmc2",
+					     "mmc2_output",
+					     "mmc2_sample";
+		};
 	};
 
 	soc {

@@ -276,6 +276,63 @@
 		#size-cells = <1>;
 		ranges;
 
+		mmc0: mmc at 01c0f000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&bus_gates 8>,
+				 <&mmc0_clk 0>,
+				 <&mmc0_clk 1>,
+				 <&mmc0_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ahb_reset0 8>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc at 01c10000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&bus_gates 9>,
+				 <&mmc1_clk 0>,
+				 <&mmc1_clk 1>,
+				 <&mmc1_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ahb_reset0 9>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc at 01c11000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&bus_gates 10>,
+				 <&mmc2_clk 0>,
+				 <&mmc2_clk 1>,
+				 <&mmc2_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ahb_reset0 10>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		pio: pinctrl at 01c20800 {
 			compatible = "allwinner,sun8i-a83t-pinctrl";
 			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,

@@ -268,6 +268,44 @@
 					     "mmc2_output",
 					     "mmc2_sample";
 		};
+
+		cpus_clk: clk at 01f01400 {
+			compatible = "allwinner,sun9i-a80-cpus-clk";
+			reg = <0x01f01400 0x4>;
+			#clock-cells = <0>;
+			clocks = <&osc16Md512>, <&osc24M>, <&pll6>, <&osc16M>;
+			clock-output-names = "cpus";
+		};
+
+		ahb0: ahb0_clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clock-div = <1>;
+			clock-mult = <1>;
+			clocks = <&cpus_clk>;
+			clock-output-names = "ahb0";
+		};
+
+		apb0: clk at 01f0140c {
+			compatible = "allwinner,sun8i-a23-apb0-clk";
+			reg = <0x01f0140c 0x4>;
+			#clock-cells = <0>;
+			clocks = <&ahb0>;
+			clock-output-names = "apb0";
+		};
+
+		apb0_gates: clk at 01f01428 {
+			compatible = "allwinner,sun8i-a83t-apb0-gates-clk";
+			reg = <0x01f01428 0x4>;
+			#clock-cells = <1>;
+			clocks = <&apb0>;
+			clock-indices = <0>, <1>,
+					<2>, <3>,
+					<4>, <6>, <7>;
+			clock-output-names = "apb0_pio", "apb0_ir",
+					"apb0_timer", "apb0_rsb",
+					"apb0_uart", "apb0_i2c0", "apb0_twd";
+		};
 	};
 
 	soc {

@@ -434,5 +472,11 @@
 			#interrupt-cells = <3>;
 			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
 		};
+
+		apb0_reset: reset at 01f014b0 {
+			reg = <0x01f014b0 0x4>;
+			compatible = "allwinner,sun6i-a31-clock-reset";
+			#reset-cells = <1>;
+		};
 	};
 };

@@ -499,5 +499,19 @@
 				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 			};
 		};
+
+		r_rsb: i2c at 01f03400 {
+			compatible = "allwinner,sun8i-a23-rsb";
+			reg = <0x01f03400 0x400>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb0_gates 3>;
+			clock-frequency = <3000000>;
+			resets = <&apb0_reset 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_rsb_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
 	};
 };

@@ -694,6 +694,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
 	sun8i-a33-sinlinx-sina33.dtb \
 	sun8i-a83t-allwinner-h8homlet-v2.dtb \
 	sun8i-a83t-cubietruck-plus.dtb \
+	sun8i-a83t-sinovoip-bpi-m3.dtb \
 	sun8i-h3-orangepi-plus.dtb
 dtb-$(CONFIG_MACH_SUN9I) += \
 	sun9i-a80-optimus.dtb \

@@ -0,0 +1,88 @@
+/*
+ * Copyright 2015 Vishnu Patekar
+ * Vishnu Patekar <vishnupatekar0510@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a83t.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+/ {
+	model = "Sinovoip BananaPi M3 v1.2";
+	compatible = "sinovoip,bpi-m3", "allwinner,sun8i-a83t";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&pio {
+	mmc0_cd_pin_bpi_m3: mmc0_cd_pin at 0 {
+		allwinner,pins = "PF6";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bpi_m3>;
+	vmmc-supply = <&reg_vcc3v0>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+	bus-width = <4>;
+	cd-inverted;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_b>;
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+};

@@ -43,6 +43,7 @@
 
 /dts-v1/;
 #include "sun8i-a83t.dtsi"
+#include "sunxi-common-regulators.dtsi"
 
 / {
 	model = "Allwinner A83T H8Homlet Proto Dev Board v2.0";

@@ -57,6 +58,25 @@
 	};
 };
 
+&pio {
+	mmc0_cd_pin_h8homlet: mmc0_cd_pin at 0 {
+		allwinner,pins = "PF6";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_h8homlet>;
+	vmmc-supply = <&reg_vcc3v0>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+	bus-width = <4>;
+	cd-inverted;
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_b>;

@@ -478,5 +478,26 @@
 			compatible = "allwinner,sun6i-a31-clock-reset";
 			#reset-cells = <1>;
 		};
+
+		r_pio: pinctrl at 01f02c00 {
+			compatible = "allwinner,sun8i-a83t-r-pinctrl";
+			reg = <0x01f02c00 0x400>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb0_gates 0>;
+			resets = <&apb0_reset 0>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#gpio-cells = <3>;
+
+			r_rsb_pins: r_rsb {
+				allwinner,pins = "PL0", "PL1";
+				allwinner,function = "s_rsb";
+				allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+			};
+		};
 	};
 };

@@ -39,6 +39,7 @@ Required properties:
 	"allwinner,sun6i-a31-apb0-clk" - for the APB0 clock on A31
 	"allwinner,sun8i-a23-apb0-clk" - for the APB0 clock on A23
 	"allwinner,sun9i-a80-apb0-clk" - for the APB0 bus clock on A80
+	"allwinner,sun8i-a83t-apb0-gates-clk" - for the APB0 gates on A83T
 	"allwinner,sun4i-a10-apb0-gates-clk" - for the APB0 gates on A10
 	"allwinner,sun5i-a13-apb0-gates-clk" - for the APB0 gates on A13
 	"allwinner,sun5i-a10s-apb0-gates-clk" - for the APB0 gates on A10s

@@ -130,6 +130,8 @@ CLK_OF_DECLARE(sun8i_a23_apb2, "allwinner,sun8i-a23-apb2-gates-clk",
 	       sunxi_simple_gates_init);
 CLK_OF_DECLARE(sun8i_a33_ahb1, "allwinner,sun8i-a33-ahb1-gates-clk",
 	       sunxi_simple_gates_init);
+CLK_OF_DECLARE(sun8i_a83t_apb0, "allwinner,sun8i-a83t-apb0-gates-clk",
+	       sunxi_simple_gates_init);
 CLK_OF_DECLARE(sun9i_a80_ahb0, "allwinner,sun9i-a80-ahb0-gates-clk",
 	       sunxi_simple_gates_init);
 CLK_OF_DECLARE(sun9i_a80_ahb1, "allwinner,sun9i-a80-ahb1-gates-clk",