[PATCH v3 1/4] dt-bindings: add SMP enable-method for Broadcom NSP

Add a compatible string "brcm,bcm-nsp-smp" for Broadcom's
Northstar Plus CPU to the 32-bit ARM CPU device tree binding
documentation file and create a new binding documentation for
Northstar Plus CPU.

Signed-off-by: Kapil Hali <redacted>
---
 .../bindings/arm/bcm/brcm,nsp-cpu-method.txt       | 36 ++++++++++++++++++++++
 Documentation/devicetree/bindings/arm/cpus.txt     |  1 +
 2 files changed, 37 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt

diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt
new file mode 100644
index 0000000..8506da7
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt

@@ -0,0 +1,36 @@
+Broadcom Northstar Plus SoC CPU Enable Method
+---------------------------------------------
+This binding defines the enable method used for starting secondary
+CPUs in the following Broadcom SoCs:
+  BCM58522, BCM58525, BCM58535, BCM58622, BCM58623, BCM58625, BCM88312
+
+The enable method is specified by defining the following required
+properties in the "cpus" device tree node:
+  - enable-method = "brcm,bcm-nsp-smp";

+
+The secondary-boot-reg property is a u32 value that specifies the
+physical address of the register used to request the ROM holding pen
+code release a secondary CPU.
+
+Example:
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               enable-method = "brcm,bcm-nsp-smp";
+               secondary-boot-reg = <0xffff042c>;
+
+               cpu0: cpu at 0 {
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a9";
+                       next-level-cache = <&L2>;
+                       reg = <0>;
+               };
+
+               cpu1: cpu at 1 {
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a9";
+                       next-level-cache = <&L2>;
+                       reg = <1>;
+               };
+       };

diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt
index 91e6e5c..6abe3f3 100644
--- a/Documentation/devicetree/bindings/arm/cpus.txt
+++ b/Documentation/devicetree/bindings/arm/cpus.txt

@@ -191,6 +191,7 @@ nodes to be present and contain the properties described below.
                            "allwinner,sun8i-a23"
                            "arm,psci"
                            "brcm,brahma-b15"
+                           "brcm,bcm-nsp-smp"
                            "marvell,armada-375-smp"
                            "marvell,armada-380-smp"
                            "marvell,armada-390-smp"
--

2.1.0