[PATCH v3 1/4] dt-bindings: add SMP enable-method for Broadcom NSP
From: Kapil Hali <hidden>
Date: 2015-11-06 21:12:25
Also in:
linux-devicetree, lkml
Subsystem:
open firmware and flattened device tree bindings, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Add a compatible string "brcm,bcm-nsp-smp" for Broadcom's Northstar Plus CPU to the 32-bit ARM CPU device tree binding documentation file and create a new binding documentation for Northstar Plus CPU. Signed-off-by: Kapil Hali <redacted> --- .../bindings/arm/bcm/brcm,nsp-cpu-method.txt | 36 ++++++++++++++++++++++ Documentation/devicetree/bindings/arm/cpus.txt | 1 + 2 files changed, 37 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt
new file mode 100644
index 0000000..8506da7
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt@@ -0,0 +1,36 @@ +Broadcom Northstar Plus SoC CPU Enable Method +--------------------------------------------- +This binding defines the enable method used for starting secondary +CPUs in the following Broadcom SoCs: + BCM58522, BCM58525, BCM58535, BCM58622, BCM58623, BCM58625, BCM88312 + +The enable method is specified by defining the following required +properties in the "cpus" device tree node: + - enable-method = "brcm,bcm-nsp-smp"; + - secondary-boot-reg = <...>; + +The secondary-boot-reg property is a u32 value that specifies the +physical address of the register used to request the ROM holding pen +code release a secondary CPU. + +Example: + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "brcm,bcm-nsp-smp"; + secondary-boot-reg = <0xffff042c>; + + cpu0: cpu at 0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; + reg = <0>; + }; + + cpu1: cpu at 1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; + reg = <1>; + }; + };
diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt
index 91e6e5c..6abe3f3 100644
--- a/Documentation/devicetree/bindings/arm/cpus.txt
+++ b/Documentation/devicetree/bindings/arm/cpus.txt@@ -191,6 +191,7 @@ nodes to be present and contain the properties described below. "allwinner,sun8i-a23" "arm,psci" "brcm,brahma-b15" + "brcm,bcm-nsp-smp" "marvell,armada-375-smp" "marvell,armada-380-smp" "marvell,armada-390-smp"
--
2.1.0