@@ -9,6 +9,27 @@ Required parent device properties:
 - #interrupt-cells 	: should be 1.
 			  The cell is the 88pm80x local IRQ number
 
+Optional nodes:
+- clocks: 88pm800 family of devices provide multiple buffered 32.768
+  KHz outputs, so to register these as clocks with common clock framework
+  instantiate a sub-node named "clocks". It uses the common clock binding
+  documented in :
+  [Documentation/devicetree/bindings/clock/clock-bindings.txt]
+
+  - #clock-cells: should be 1.
+
+  - The following is the list of clocks generated by the controller. Each clock
+    is assigned an identifier and client nodes use this identifier to specify
+    the clock which they consume.
+    Clock		ID           	Devices
+    ----------------------------------------------------------
+    pm800_clk32k_1	0		88PM800 and 88PM860
+    pm800_clk32k_2	1		88PM800 and 88PM860
+    pm800_clk32k_3	2		88PM800
+
+  - compatible: Should be : "marvell,88pm800-clk"
+
+
 88pm80x family of devices consists of varied group of sub-devices:
 
 Device		 	Supply Names	 Description

@@ -16,6 +37,7 @@ Device		 	Supply Names	 Description
 88pm80x-onkey		:		: On key
 88pm80x-rtc		:		: RTC
 88pm80x-regulator	:		: Regulators
+88pm80x-clk		:		: 32KHz Clk provider
 
 Example:
 

@@ -27,6 +49,12 @@ Example:
 		interrupt-controller;
 		#interrupt-cells = <1>;
 
+		pm800clk: clocks {
+			compatible = "marvell,88pm800-clk";
+			#clock-cells = <1>;
+			clock-output-names = "xx", "yy", "zz";
+		};
+
 		regulators {
 			compatible = "marvell,88pm80x-regulator";