[PATCH 1/4] mfd: 88pm800: Update the header file with 32K clk related macros
From: Vaibhav Hiremath <hidden>
Date: 2015-07-21 11:16:52
Also in:
linux-clk, linux-devicetree, lkml
Subsystem:
multifunction devices (mfd), the rest · Maintainers:
Lee Jones, Linus Torvalds
Update header file with required macros for 32KHz buffered clock output of 88PM800 family of device. These macros will be used in clk provider driver. Signed-off-by: Vaibhav Hiremath <redacted> --- include/linux/mfd/88pm80x.h | 12 ++++++++++++ 1 file changed, 12 insertions(+)
diff --git a/include/linux/mfd/88pm80x.h b/include/linux/mfd/88pm80x.h
index 05d9bad..680e4eb 100644
--- a/include/linux/mfd/88pm80x.h
+++ b/include/linux/mfd/88pm80x.h@@ -91,6 +91,7 @@ enum { /* Referance and low power registers */ #define PM800_LOW_POWER1 (0x20) #define PM800_LOW_POWER2 (0x21) +#define PM800_LOW_POWER2_XO_LJ_EN BIT(5) #define PM800_LOW_POWER_CONFIG3 (0x22) #define PM800_LDOBK_FREEZE BIT(7)
@@ -138,6 +139,13 @@ enum { #define PM800_ALARM BIT(5) #define PM800_RTC1_USE_XO BIT(7) +#define PM800_32K_OUTX_SEL_MASK (0x3) +/* 32KHz clk output sel mode */ +#define PM800_32K_OUTX_SEL_ZERO (0x0) +#define PM800_32K_OUTX_SEL_INT_32KHZ (0x1) +#define PM800_32K_OUTX_SEL_XO_32KHZ (0x2) +#define PM800_32K_OUTX_SEL_HIZ (0x3) + /* Regulator Control Registers: BUCK1,BUCK5,LDO1 have DVC */ /* buck registers */
@@ -208,6 +216,10 @@ enum { #define PM800_PMOD_MEAS1 0x52 #define PM800_PMOD_MEAS2 0x53 +/* Oscillator control */ +#define PM800_OSC_CNTRL1 (0x50) +#define PM800_OSC_CNTRL1_OSC_FREERUN_EN BIT(1) + #define PM800_GPADC0_MEAS1 0x54 #define PM800_GPADC0_MEAS2 0x55 #define PM800_GPADC1_MEAS1 0x56
--
1.9.1