[PATCH v4 09/10] ARM: berlin: add BG2Q node for the nand
From: Antoine Tenart <hidden>
Date: 2015-04-15 17:24:46
Also in:
lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
Add a node describing the nand controller of the Marvell Berlin BG2Q SoC. It uses the pxa3xx nand driver, with a dedicated compatible. Also add the corresponding pinmuxing configuration. Signed-off-by: Antoine Tenart <redacted> --- arch/arm/boot/dts/berlin2q.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
index be5397288d24..aeb3a0ea0540 100644
--- a/arch/arm/boot/dts/berlin2q.dtsi
+++ b/arch/arm/boot/dts/berlin2q.dtsi@@ -437,6 +437,19 @@ status = "disabled"; }; + nand0: nand at f00000 { + compatible = "marvell,berlin2-nand"; + reg = <0xf00000 0x10000>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&chip CLKID_NFC>, + <&chip CLKID_NFC_ECC>; + clock-names = "nfc", "ecc"; + + #address-cells = <1>; + + status = "disabled"; + }; + apb at fc0000 { compatible = "simple-bus"; #address-cells = <1>;
--
2.3.5