[PATCH v4 02/10] Documentation: bindings: document the clocks for pxa3xx-nand
From: Antoine Tenart <hidden>
Date: 2015-04-15 17:25:03
Also in:
lkml
Subsystem:
memory technology devices (mtd), open firmware and flattened device tree bindings, the rest · Maintainers:
Miquel Raynal, Richard Weinberger, Vignesh Raghavendra, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
The pxa3xx nand driver requires at least one clock to probe correctly. A second one, named 'ecc' can be specified if needed. Add the corresponding documentation. Signed-off-by: Antoine Tenart <redacted> --- Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt b/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt
index de8b517a5521..ecd1fc071f81 100644
--- a/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt@@ -8,6 +8,8 @@ Required properties: - reg: The register base for the controller - interrupts: The interrupt to map - #address-cells: Set to <1> if the node includes partitions + - clocks: A phandle to the clocks + - clock-names: 'nfc' and 'ecc'. The 'nfc' clock is mandatory. Optional properties:
@@ -32,6 +34,8 @@ Example: compatible = "marvell,pxa3xx-nand"; reg = <0x43100000 90>; interrupts = <45>; + clocks = <&gateclk 11>; + clock-names = "nfc"; #address-cells = <1>; marvell,nand-enable-arbiter;
--
2.3.5