[PATCH v4 07/10] Documentation: bindings: add the Berlin nand controller compatible
STALE4173d
From: Antoine Tenart <hidden>
Date: 2015-04-15 17:24:39
Also in:
lkml
Subsystem:
memory technology devices (mtd), open firmware and flattened device tree bindings, the rest · Maintainers:
Miquel Raynal, Richard Weinberger, Vignesh Raghavendra, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Revision v4 of 5 in this series.
Revisions (5)
The Berlin nand controller support was introduced using the existing pxa3xx nand driver. Add the Berlin specific compatible into the documentation. Signed-off-by: Antoine Tenart <redacted> --- Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt | 1 + 1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt b/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt
index ecd1fc071f81..f33ee0aa0a2e 100644
--- a/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt@@ -5,6 +5,7 @@ Required properties: - compatible: Should be set to one of the following: marvell,pxa3xx-nand marvell,armada370-nand + marvell,berlin2-nand - reg: The register base for the controller - interrupts: The interrupt to map - #address-cells: Set to <1> if the node includes partitions
--
2.3.5