[PATCH v3 2/2] ARM: mvebu: a385-db-ap: Enable the NAND
From: Maxime Ripard <hidden>
Date: 2015-02-16 12:55:08
Also in:
lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
The Armada 385 Access Point Development Board has a 1GB NAND SLC chip from Micron as its main storage. Enable it. Signed-off-by: Maxime Ripard <redacted> --- arch/arm/boot/dts/armada-385-db-ap.dts | 13 +++++++++++++ 1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts
index b891b4c897f5..ee648fb19075 100644
--- a/arch/arm/boot/dts/armada-385-db-ap.dts
+++ b/arch/arm/boot/dts/armada-385-db-ap.dts@@ -130,6 +130,19 @@ phy-mode = "rgmii-id"; }; + nfc: flash at d0000 { + status = "okay"; + #address-cells = <1>; + #size-cells = <1>; + + num-cs = <1>; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + marvell,nand-keep-config; + marvell,nand-enable-arbiter; + nand-on-flash-bbt; + }; + usb3 at f0000 { status = "okay"; usb-phy = <&usb3_phy>;
--
2.3.0