[PATCH 2/7] can: m_can: fix the incorrect error messages
From: Dong Aisheng <hidden>
Date: 2014-10-29 10:45:22
Also in:
linux-can, netdev
Subsystem:
can network drivers, mcan device driver, the rest · Maintainers:
Marc Kleine-Budde, Vincent Mailhol, Markus Schneider-Pargmann, Linus Torvalds
Fix a few error messages. Signed-off-by: Dong Aisheng <redacted> --- drivers/net/can/m_can/m_can.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
index 8692848..2784423 100644
--- a/drivers/net/can/m_can/m_can.c
+++ b/drivers/net/can/m_can/m_can.c@@ -606,14 +606,14 @@ static int m_can_handle_state_errors(struct net_device *dev, u32 psr) if ((psr & PSR_EP) && (priv->can.state != CAN_STATE_ERROR_PASSIVE)) { - netdev_dbg(dev, "entered error warning state\n"); + netdev_dbg(dev, "entered error passive state\n"); work_done += m_can_handle_state_change(dev, CAN_STATE_ERROR_PASSIVE); } if ((psr & PSR_BO) && (priv->can.state != CAN_STATE_BUS_OFF)) { - netdev_dbg(dev, "entered error warning state\n"); + netdev_dbg(dev, "entered error bus off state\n"); work_done += m_can_handle_state_change(dev, CAN_STATE_BUS_OFF); }
@@ -625,7 +625,7 @@ static void m_can_handle_other_err(struct net_device *dev, u32 irqstatus) { if (irqstatus & IR_WDI) netdev_err(dev, "Message RAM Watchdog event due to missing READY\n"); - if (irqstatus & IR_BEU) + if (irqstatus & IR_ELO) netdev_err(dev, "Error Logging Overflow\n"); if (irqstatus & IR_BEU) netdev_err(dev, "Bit Error Uncorrected\n");
--
1.9.1