[PATCH v2 00/11] ARM: dts: zynq: Prepare Parallella

Hi Andreas,

-----Original Message-----
From: Andreas F?rber [mailto:afaerber at suse.de]
Sent: Friday, July 25, 2014 4:30 AM
To: Michal Simek
Cc: Andreas Olofsson; Matteo Vit; Sean Rickerd; devicetree at vger.kernel.org;
linux-arm-kernel at lists.infradead.org; linux-kernel at vger.kernel.org; Andreas
F?rber; Punnaiah Choudary Kalluri; Lars-Peter Clausen
Subject: [PATCH v2 00/11] ARM: dts: zynq: Prepare Parallella

Hello,

This patch series adds an initial device tree for the Parallella board.
UART, SD card, Ethernet are enabled.
Not yet enabled are HDMI, QSPI flash and 2x USB.

v2 adds some SPI and FPGA pieces and tidies the device tree with a
compatible string and matching documentation.

Not having all pieces for testing all of this (most notably I'm missing
ADI ADV7513 and AXI-HDMI support for VDMA and axi-clkgen, as well as
the 25Q128A flash chip for QSPI), I've kept new things in separate patches
so that we can make progress on the basic version and possibly squash
further cherry-picked pieces.

Punnaiah Choudary Kalluri had recently proposed to extend the Chipidea
USB driver for Zynq; it kept complaining about the PHY though, and I
haven't spotted a revised version based on the generic driver yet.
https://patchwork.kernel.org/patch/4434681/

The plan is, go with generic chip idea driver which is currently under review. 
http://www.spinics.net/lists/linux-usb/msg109576.html

So, please wait some more time for extending the Chip idea driver support
 to zynq.

Punnaiah

My rebasing work branch is here:
https://github.com/afaerber/linux/commits/parallella-next

Regards,
Andreas

Cc: Punnaiah Choudary Kalluri <redacted> (USB)
Cc: Lars-Peter Clausen <lars@metafoo.de> (HDMI)

Andreas F?rber (11):
 Documentation: devicetree: Adapteva vendor prefix
 Documentation: devicetree: Adapteva boards
 ARM: dts: zynq: Add Parallella device tree
 ARM: dts: zynq: Update deprecated xuartps clock names
 ARM: dts: zynq: Add QSPI for Parallella
 ARM: dts: zynq: Add DMAC for Parallella
 Documentation: devicetree: Fix Xilinx VDMA specification
 ARM: dts: zynq: Add VDMA to Parallella
 Documentation: devicetree: Fix ADI AXI SPDIF specification
 ARM: dts: zynq: Add SPDIF for Parallella
 ARM: dts: zynq: Add AXI clkgen for Parallella

Documentation/devicetree/bindings/arm/adapteva.txt |   7 ++
.../devicetree/bindings/dma/xilinx/xilinx_vdma.txt |   2 +-
.../devicetree/bindings/sound/adi,axi-spdif-tx.txt |   2 +-
.../devicetree/bindings/vendor-prefixes.txt        |   1 +
arch/arm/boot/dts/Makefile                         |   4 +-
arch/arm/boot/dts/zynq-7000.dtsi                   |  58 +++++++++-
arch/arm/boot/dts/zynq-parallella.dts              | 119
+++++++++++++++++++++
7 files changed, 188 insertions(+), 5 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/adapteva.txt
create mode 100644 arch/arm/boot/dts/zynq-parallella.dts

--
1.9.3