On Sat, Jun 21, 2014 at 01:37:18AM +0200, Simon Guinot wrote:

On Mon, May 26, 2014 at 09:29:49PM +0200, Andrew Lunn wrote:

quoted

Describe LaCie 2Big and 5Big Network v2 using device tree.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
---
v1->v2
Fix size of memory
Clean up ethernet nodes
s/at/atmel/

v2->v3
gpio_poweroff->gpio-poweroff
gpio_key->gpio-key
s/ok/okay
Remove spi pinctrl properties.

v3->v4
Add _v2 to compatible name of devices
Fix SoC version to 6281
tabification of DT files
Add fan controller and clock node for fan controller
---
 arch/arm/boot/dts/Makefile              |   2 +
 arch/arm/boot/dts/kirkwood-net2big.dts  |  30 ++++++
 arch/arm/boot/dts/kirkwood-net5big.dts  |  83 +++++++++++++++
 arch/arm/boot/dts/kirkwood-netxbig.dtsi | 180 ++++++++++++++++++++++++++++++++
 4 files changed, 295 insertions(+)
 create mode 100644 arch/arm/boot/dts/kirkwood-net2big.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-net5big.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-netxbig.dtsi

...

quoted

diff --git a/arch/arm/boot/dts/kirkwood-net5big.dts b/arch/arm/boot/dts/kirkwood-net5big.dts
new file mode 100644
index 000000000000..f665fcd6005b
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-net5big.dts

@@ -0,0 +1,83 @@
+/*
+ * Device Tree file for LaCie 5Big Network v2
+ *
+ * Copyright (C) 2014
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * Based on netxbig_v2-setup.c,
+ * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-netxbig.dtsi"
+
+/ {
+	model = "LaCie 5Big Network v2";
+	compatible = "lacie,net2big_v2", "lacie,netxbig", "marvell,kirkwood-88f6281", "marvell,kirkwood";

"lacie,net2big_v2" must be replaced with "lacie,net5big_v2".

quoted

+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+};
+
+&regulators {
+	regulator at 3 {
+		compatible = "regulator-fixed";
+		reg = <3>;
+		regulator-name = "hdd2power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio0 19 GPIO_ACTIVE_HIGH>;

19 must be replaced with 9.

quoted

+	};
+
+	regulator at 4 {
+		compatible = "regulator-fixed";
+		reg = <4>;
+		regulator-name = "hdd3power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio0 20 GPIO_ACTIVE_HIGH>;

20 must be replaced with 10.

quoted

+	};
+
+	regulator at 5 {
+		compatible = "regulator-fixed";
+		reg = <5>;
+		regulator-name = "hdd4power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;

21 must be replaced with 11.

Andrew, with all this changes, I can confirm that the 2Big and 5Big
Network v2 boards are working as expected.

Tested-by: Simon Guinot <redacted>

Changes squashed in and pushed with your Tested-by.

thx,

Jason.