[PATCHv4 1/4] ARM: Kirkwood: Add setup file for netxbig LEDs

On Fri, Jun 20, 2014 at 04:51:47PM -0400, Jason Cooper wrote:

On Mon, May 26, 2014 at 09:29:48PM +0200, Andrew Lunn wrote:

quoted

There is currently no DT binding for the CPLD which controls the LEDs
on the Net 2Big and Net 5Big. So use a platform device.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
v3-v4:
  rename board-nextbig.c to nextbig.c
---
 arch/arm/mach-mvebu/Kconfig    |   7 ++
 arch/arm/mach-mvebu/Makefile   |   1 +
 arch/arm/mach-mvebu/board.h    |   5 ++
 arch/arm/mach-mvebu/kirkwood.c |   3 +
 arch/arm/mach-mvebu/netxbig.c  | 191 +++++++++++++++++++++++++++++++++++++++++
 5 files changed, 207 insertions(+)
 create mode 100644 arch/arm/mach-mvebu/netxbig.c

Applied to mvebu/soc

Hi Jason and Andrew,

First, I apologize for being late (as usual).

Some fixes are still needed for this patch series. See my incoming
comments.

Let me know if you want me to send a patch rather than comments.

Thanks,

Simon
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 181 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140621/23f37bc7/attachment.sig>