Hi,

This series adds support for the onboard AHCI-compliant Serial ATA
controller found on Tegra124 systems-on-chip. The controller is
enabled on Jetson TK1. The series depends on Peter's efuse series 
and Thierry's yet to be submitted XUSB pinctrl driver.

A branch containing the series is located at 
	git://github.com/cyndis/linux.git
branch ahci-rel.

Mikko Perttunen (9):
  of: Add NVIDIA Tegra SATA controller binding
  ARM: tegra: Add SATA controller to Tegra124 device tree
  ARM: tegra: Add SATA and SATA power to Jetson TK1 device tree
  clk: tegra: Enable hardware control of SATA PLL
  clk: tegra: Add SATA clocks to Tegra124 initialization table
  ARM: tegra: Export tegra_powergate_power_on
  ahci: Increase AHCI_MAX_CLKS to 4
  ata: Add support for the Tegra124 SATA controller
  ARM: tegra: Add options for Tegra AHCI support to tegra_defconfig

 .../devicetree/bindings/ata/tegra-sata.txt         |  29 ++
 arch/arm/boot/dts/tegra124-jetson-tk1.dts          |  36 ++
 arch/arm/boot/dts/tegra124.dtsi                    |  24 ++
 arch/arm/configs/tegra_defconfig                   |   3 +
 arch/arm/mach-tegra/powergate.c                    |   1 +
 drivers/ata/Kconfig                                |   9 +
 drivers/ata/Makefile                               |   1 +
 drivers/ata/ahci.h                                 |   2 +-
 drivers/ata/ahci_tegra.c                           | 386 +++++++++++++++++++++
 drivers/clk/tegra/clk-pll.c                        |   8 +
 drivers/clk/tegra/clk-tegra124.c                   |   2 +
 11 files changed, 500 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/ata/tegra-sata.txt
 create mode 100644 drivers/ata/ahci_tegra.c

-- 
1.8.1.5