On 02/14/2014 03:33 PM, Lee Jones wrote:

quoted

quoted

quoted

Use a meaningful name for the reference clocks so that it indicates the function.

CC: Lee Jones <redacted>
CC: Samuel Ortiz <redacted>
Signed-off-by: Roger Quadros <redacted>
---
 drivers/mfd/omap-usb-host.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index 60a3bed..ce620a8 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c

@@ -714,21 +714,21 @@ static int usbhs_omap_probe(struct platform_device *pdev)
 		goto err_mem;
 	}
 
-	omap->xclk60mhsp1_ck = devm_clk_get(dev, "xclk60mhsp1_ck");
+	omap->xclk60mhsp1_ck = devm_clk_get(dev, "refclk_60m_ext_p1");

You can't do that. These changes will have to be in the same patch as
the core change i.e. where they are initialised.

I'm not touching them anywhere in this series. When core changes are you
referring to?

The ones in:
  arch/arm/mach-omap2/cclock3xxx_data.c

OK, right. They are now no longer needed so I'll get rid of them.
In fact that change should either be in a separate patch or combined with PATCH 2
in this series. What do you suggest?

cheers,
-roger

quoted

quoted

quoted

 	if (IS_ERR(omap->xclk60mhsp1_ck)) {
 		ret = PTR_ERR(omap->xclk60mhsp1_ck);
 		dev_err(dev, "xclk60mhsp1_ck failed error:%d\n", ret);
 		goto err_mem;
 	}
 
-	omap->xclk60mhsp2_ck = devm_clk_get(dev, "xclk60mhsp2_ck");
+	omap->xclk60mhsp2_ck = devm_clk_get(dev, "refclk_60m_ext_p2");
 	if (IS_ERR(omap->xclk60mhsp2_ck)) {
 		ret = PTR_ERR(omap->xclk60mhsp2_ck);
 		dev_err(dev, "xclk60mhsp2_ck failed error:%d\n", ret);
 		goto err_mem;
 	}
 
-	omap->init_60m_fclk = devm_clk_get(dev, "init_60m_fclk");
+	omap->init_60m_fclk = devm_clk_get(dev, "refclk_60m_int");
 	if (IS_ERR(omap->init_60m_fclk)) {
 		ret = PTR_ERR(omap->init_60m_fclk);
 		dev_err(dev, "init_60m_fclk failed error:%d\n", ret);