[PATCH v7 05/12] mfd: omap-usb-tll: Update DT clock binding information
From: Roger Quadros <hidden>
Date: 2014-02-12 10:20:00
Also in:
linux-devicetree, linux-omap, lkml
Subsystem:
multifunction devices (mfd), open firmware and flattened device tree bindings, the rest · Maintainers:
Lee Jones, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
The omap-usb-tll driver needs one clock for each TLL channel. Add this information to the DT binding document. CC: Lee Jones <redacted> CC: Samuel Ortiz <redacted> Signed-off-by: Roger Quadros <redacted> --- Documentation/devicetree/bindings/mfd/omap-usb-tll.txt | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/Documentation/devicetree/bindings/mfd/omap-usb-tll.txt b/Documentation/devicetree/bindings/mfd/omap-usb-tll.txt
index 62fe697..c58d704 100644
--- a/Documentation/devicetree/bindings/mfd/omap-usb-tll.txt
+++ b/Documentation/devicetree/bindings/mfd/omap-usb-tll.txt@@ -7,6 +7,16 @@ Required properties: - interrupts : should contain the TLL module's interrupt - ti,hwmod : must contain "usb_tll_hs" +Optional properties: + +- clocks: a list of phandles and clock-specifier pairs, one for each entry in + clock-names. + +- clock-names: should include: + * "usb_tll_hs_usb_ch0_clk" - USB TLL channel 0 clock + * "usb_tll_hs_usb_ch1_clk" - USB TLL channel 1 clock + * "usb_tll_hs_usb_ch2_clk" - USB TLL channel 2 clock + Example: usbhstll: usbhstll at 4a062000 {
--
1.8.3.2