[PATCH v7 08/12] ARM: dts: omap4-panda: Provide USB PHY clock
STALE4608d
From: Roger Quadros <hidden>
Date: 2014-02-12 10:20:17
Also in:
linux-devicetree, linux-omap, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
Revision v7 of 3 in this series.
Revisions (3)
- v7 current
- v8 [diff vs current]
- v9 [diff vs current]
The USB PHY gets its clock from AUXCLK3. Provide this information. Signed-off-by: Roger Quadros <redacted> --- arch/arm/boot/dts/omap4-panda-common.dtsi | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index 88c6a05..50b72966 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi@@ -83,12 +83,8 @@ compatible = "usb-nop-xceiv"; reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; /* gpio_62 */ vcc-supply = <&hsusb1_power>; - /** - * FIXME: - * put the right clock phandle here when available - * clocks = <&auxclk3>; - * clock-names = "main_clk"; - */ + clocks = <&auxclk3_ck>; + clock-names = "main_clk"; clock-frequency = <19200000>; };
--
1.8.3.2