On Thu, 2013-12-19 at 13:35 +0400, Sergei Ianovich wrote:

Hi Heikki,

On Thu, 2013-12-19 at 10:51 +0200, Heikki Krogerus wrote:

quoted

I noticed one more thing. I'm sorry about commenting this late.

Since you set the type PORT_XSCALE, don's you want to use
UPF_FIXED_TYPE flag instead of the UPF_SKIP_TEST here? Otherwise the
type will just get overridden and autoconfig() will be executed.

UPF_FIXED_PORT was my first guess. However, it didn't work.

I've also tried to do ioremap in serial_pxa_probe instead of using
UPF_IOREMAP. This didn't work as well.

I didn't clarify properly.

UPF_SKIP_TEST skips only the loopback test. This test could work on PXA,
but requires PXA-specific pre-initialization. There are more test after
the loopback one, which will fail if we are not on PXA. So I decided
that skipping it is easier than tricky rewriting of autoconfig().