Thread (41 messages) 41 messages, 9 authors, 2013-10-30

[PATCH v3 06/10] spmi: document the PMIC arbiter SPMI bindings

From: Josh Cartwright <hidden>
Date: 2013-10-29 15:13:54
Also in: linux-arm-msm, linux-devicetree, lkml

On Tue, Oct 29, 2013 at 04:08:29PM +0200, Ivan T. Ivanov wrote:
On Mon, 2013-10-28 at 13:12 -0500, Josh Cartwright wrote: 
quoted
Signed-off-by: Josh Cartwright <redacted>
---
 .../bindings/spmi/qcom,spmi-pmic-arb.txt           | 42 ++++++++++++++++++++++
 1 file changed, 42 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
diff --git a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
new file mode 100644
index 0000000..68949aa
--- /dev/null
+++ b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
@@ -0,0 +1,42 @@
+Qualcomm SPMI Controller (PMIC Arbiter)
+
+The SPMI PMIC Arbiter is found on the Snapdragon 800 Series.  It is an SPMI
+controller with wrapping arbitration logic to allow for multiple on-chip
+devices to control a single SPMI master.
+
+The PMIC Arbiter can also act as an interrupt controller, providing interrupts
+to slave devices.
+
+See spmi.txt for the generic SPMI controller binding requirements for child
+nodes.
+
+Required properties:
+- compatible : should be "qcom,spmi-pmic-arb".
+- reg-names  : should be "core", "intr", "cnfg"
+- reg : offset and length of the PMIC Arbiter Core register map.
+- reg : offset and length of the PMIC Arbiter Interrupt controller register map.
+- reg : offset and length of the PMIC Arbiter Configuration register map.
+- #address-cells : must be set to 1
This doesn't seem to follow generic set of bindings for the SPMI
controllers. #address-cells : must be set to 2.
Indeed, good catch.  I'll fix it up.

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by The Linux Foundation
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help