[PATCH v3 05/10] ARM: dts: omap3-beagle: Use reset-gpios for hsusb2_reset

On 03/10/2013 14:05, Benoit Cousson wrote:

Hi Roger,

Yes, I will. I've been waiting for these ones for so long :-)

In fact it does not apply correctly on my for_3.13/dts branch :-(

error: arch/arm/boot/dts/omap3-beagle.dts: patch does not apply
Patch failed at 0004 ARM: dts: omap3-beagle: Make USB host pin naming 
consistent

Could you rebase it?

Thanks,
Benoit

Thanks,
Benoit

On 03/10/2013 12:34, Roger Quadros wrote:

quoted

Hi Benoit,

Could you please take the device tree related patches [5 to 10] in
this series?
Thanks.

cheers,
-roger

On 09/24/2013 11:53 AM, Roger Quadros wrote:

quoted

We no longer need to model the RESET line as a regulator since
the USB phy-nop driver accepts "reset-gpios" property.

Signed-off-by: Roger Quadros <redacted>
---
  arch/arm/boot/dts/omap3-beagle.dts |   13 +------------
  1 files changed, 1 insertions(+), 12 deletions(-)

diff --git a/arch/arm/boot/dts/omap3-beagle.dts

b/arch/arm/boot/dts/omap3-beagle.dts
index dfd8310..71bde47 100644

--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts

@@ -44,17 +44,6 @@
          };
      };

-    /* HS USB Port 2 RESET */
-    hsusb2_reset: hsusb2_reset_reg {
-        compatible = "regulator-fixed";
-        regulator-name = "hsusb2_reset";
-        regulator-min-microvolt = <3300000>;
-        regulator-max-microvolt = <3300000>;
-        gpio = <&gpio5 19 0>;    /* gpio_147 */
-        startup-delay-us = <70000>;
-        enable-active-high;
-    };
-
      /* HS USB Port 2 Power */
      hsusb2_power: hsusb2_power_reg {
          compatible = "regulator-fixed";

@@ -68,7 +57,7 @@
      /* HS USB Host PHY on PORT 2 */
      hsusb2_phy: hsusb2_phy {
          compatible = "usb-nop-xceiv";
-        reset-supply = <&hsusb2_reset>;
+        reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>;    /* gpio_147 */
          vcc-supply = <&hsusb2_power>;
      };