Hi Tony!

On Wednesday 21 August 2013 at 09:50:16, Tony Lindgren wrote:

Benoit,

Care to take a look at this too?

Benoit already applied this with Mark Rutlands Acked-By and Javier Martinez 
Canillas Reviewed-by.

Regards,
Lars
 

* Lars Poeschel [off-list ref] [130807 04:14]:

quoted

From: Lars Poeschel <redacted>

Following commit ff5c9059 and therefore other omap platforms using
the gpio-omap driver correct the #interrupt-cells property on am33xx
too. The omap gpio binding documentaion also states that
the #interrupt-cells property should be 2.

Signed-off-by: Lars Poeschel <redacted>
---

 arch/arm/boot/dts/am33xx.dtsi |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/am33xx.dtsi

b/arch/arm/boot/dts/am33xx.dtsi index 38b446b..033c5dd 100644

--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi

@@ -102,7 +102,7 @@

 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;

-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;

 			reg = <0x44e07000 0x1000>;
 			interrupts = <96>;
 		
 		};

@@ -113,7 +113,7 @@

 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;

-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;

 			reg = <0x4804c000 0x1000>;
 			interrupts = <98>;
 		
 		};

@@ -124,7 +124,7 @@

 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;

-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;

 			reg = <0x481ac000 0x1000>;
 			interrupts = <32>;
 		
 		};

@@ -135,7 +135,7 @@

 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;

-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;

 			reg = <0x481ae000 0x1000>;
 			interrupts = <62>;
 		
 		};