[PATCH] ARM: dts: am33xx: Correct gpio #interrupt-cells property
From: mark.rutland@arm.com (Mark Rutland)
Date: 2013-08-07 14:53:59
Also in:
linux-omap, lkml
On Wed, Aug 07, 2013 at 12:06:32PM +0100, Lars Poeschel wrote:
From: Lars Poeschel <redacted> Following commit ff5c9059 and therefore other omap platforms using the gpio-omap driver correct the #interrupt-cells property on am33xx too. The omap gpio binding documentaion also states that the #interrupt-cells property should be 2.
I take it there are no device nodes for which any of these nodes are an interrupt parent (which would need to be updated)? If so: Acked-by: Mark Rutland <mark.rutland@arm.com> Thanks, Mark.
quoted hunk ↗ jump to hunk
Signed-off-by: Lars Poeschel <redacted> --- arch/arm/boot/dts/am33xx.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 38b446b..033c5dd 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi@@ -102,7 +102,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; reg = <0x44e07000 0x1000>; interrupts = <96>; };@@ -113,7 +113,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; reg = <0x4804c000 0x1000>; interrupts = <98>; };@@ -124,7 +124,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; reg = <0x481ac000 0x1000>; interrupts = <32>; };@@ -135,7 +135,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; reg = <0x481ae000 0x1000>; interrupts = <62>; };-- 1.7.10.4 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel at lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel