[PATCH] ARM: dts: am33xx: Correct gpio #interrupt-cells property

On Wednesday 07 August 2013 at 16:53:09, Mark Rutland wrote:

On Wed, Aug 07, 2013 at 12:06:32PM +0100, Lars Poeschel wrote:

quoted

From: Lars Poeschel <redacted>

Following commit ff5c9059 and therefore other omap platforms using
the gpio-omap driver correct the #interrupt-cells property on am33xx
too. The omap gpio binding documentaion also states that
the #interrupt-cells property should be 2.

I take it there are no device nodes for which any of these nodes are an
interrupt parent (which would need to be updated)?

As far as I know: No.

Lars

If so:

Acked-by: Mark Rutland <mark.rutland@arm.com>

Thanks,
Mark.

quoted

Signed-off-by: Lars Poeschel <redacted>
---

 arch/arm/boot/dts/am33xx.dtsi |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/am33xx.dtsi

b/arch/arm/boot/dts/am33xx.dtsi index 38b446b..033c5dd 100644

--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi

@@ -102,7 +102,7 @@

 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;

-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;

 			reg = <0x44e07000 0x1000>;
 			interrupts = <96>;
 		
 		};

@@ -113,7 +113,7 @@

 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;

-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;

 			reg = <0x4804c000 0x1000>;
 			interrupts = <98>;
 		
 		};

@@ -124,7 +124,7 @@

 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;

-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;

 			reg = <0x481ac000 0x1000>;
 			interrupts = <32>;
 		
 		};

@@ -135,7 +135,7 @@

 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;

-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;

 			reg = <0x481ae000 0x1000>;
 			interrupts = <62>;
 		
 		};