On 08/06/2013 03:18 PM, Michal Simek wrote:

[ ... ]

quoted

quoted

quoted

quoted

Soren: Are you able to replicate this issue on QEMU?
If yes, it should be the best if you can provide Qemu, kernel .config/
rootfs and simple manual to Daniel how to reach that fault.

I tried to download qemu for zynq but it fails:

git clone git://git.xilinx.com/qemu-xarm.git
Cloning into 'qemu-xarm'...
fatal: The remote end hung up unexpectedly

Not sure which site have you found but
it should be just qemu.git
https://github.com/Xilinx/qemu

or github clone.

Ok, cool I was able to clone it.

quoted

quoted

I am also looking for the option specified for the kernel:

"The kernel needs to be built with this feature turned on (in
menuconfig, System Type->Xilinx Specific Features -> Device Tree At
Fixed Address)."

Ok.

quoted

This also sound like a very ancient tree.
This is the latest kernel tree - master-next is the latest devel branch.
https://github.com/Xilinx/linux-xlnx

Ok, cool. I have the right one.

Following the documentation, I was able to boot a kernel with qemu for
the linux-xlnx and qemu-xilinx.

But this kernel is outdated regarding the upstream one, so I tried to
boot a 3.11-rc4 kernel without success, I did the following:

I used the default config file from linux-xlnx for the upstream kernel.

I compiled the kernel with:

make -j 5 ARCH=arm CROSS_COMPILE=arm-linux-gnueabi-
UIMAGE_LOADADDR=0x8000 uImage

I generated the dtb with:

make -j 5 ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- dtbs

For qemu, I started qemu with:

./arm-softmmu/qemu-system-arm -M arm-generic-fdt -nographic -smp 2
-machine linux=on -serial mon:stdio -dtb zynq-zed.dtb -kernel
kernel/zImage -initrd filesystem/ramdisk.img

I tried with the dtb available for the upstream kernel:

zynq-zc706.dtb, zynq-zc702.dtb and zynq-zed.dtb

Did I miss something ?

Thanks
  -- Daniel

quoted

quoted

Or there should be an option to use the latest kernel from kernel.org.
(I think Soren is using it)

Zynq is the part of multiplatfrom kernel and cadence ttc is there,
dts is also in the mainline kernel.

quoted

ps : apart that, well documented website !

Can you send me the link to it?

http://xilinx.wikidot.com/zynq-qemu
http://xilinx.wikidot.com/zynq-linux

I will find out information why it is still there.
I think it was moved to the new location.

quoted

quoted

This should be the main page for it.
http://www.wiki.xilinx.com/

-- 
 <http://www.linaro.org/> Linaro.org ? Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog