On Tue, Jun 11, 2013 at 1:19 AM, Russell King - ARM Linux
[off-list ref] wrote:

On Mon, Jun 10, 2013 at 12:46:59PM +0100, Srinivas KANDAGATLA wrote:

quoted

quoted

    +       aux_ctrl = (0x1 << L2X0_AUX_CTRL_SHARE_OVERRIDE_SHIFT) |
    +               (0x1 << L2X0_AUX_CTRL_DATA_PREFETCH_SHIFT) |
    +               (0x1 << L2X0_AUX_CTRL_INSTR_PREFETCH_SHIFT) |
    +               (way_size << L2X0_AUX_CTRL_WAY_SIZE_SHIFT);



#include <linux/bitops.h>
Linus Walleij would write use  BIT() here

I will use BIT() macro.

Without checking those fields... BIT() is only appropriate if you're
really talking about single bits.  If you have a field of more than a
single bit which you happen to be setting to '1' then it's not
appropriate to use BIT().

This is true. Luckily I didn't push for it myself this time.

However, on a related key we have this hidden away in MFD
drivers/mfd/dbx500-prcmu-regs.h:

#define BITS(_start, _end) ((BIT(_end) - BIT(_start)) + BIT(_end))

It's used like so:

#define PRCM_PLL_FREQ_D_MASK    BITS(0, 7)

So you can define an multi-bit mask with a macro like that.

If there is interest in a construct like this I can make a patch to
move this thing to <linux/bitops.h>.

Yours,
Linus Walleij