[PATCH 2/5] net/at91_ether: select MACB in Kconfig
From: Jean-Christophe PLAGNIOL-VILLARD <hidden>
Date: 2012-10-21 18:31:22
Also in:
netdev
On 16:23 Sun 21 Oct , Joachim Eastwood wrote:
quoted hunk ↗ jump to hunk
Now that HAVE_NET_MACB is gone let's just select MACB to satisfy the dependecies in at91_ether. PHYLIB will then by selected by MACB. Signed-off-by: Joachim Eastwood <redacted> --- drivers/net/ethernet/cadence/Kconfig | 2 +- drivers/net/ethernet/cadence/Makefile | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)diff --git a/drivers/net/ethernet/cadence/Kconfig b/drivers/net/ethernet/cadence/Kconfig index 5d1ea30..f6d0956 100644 --- a/drivers/net/ethernet/cadence/Kconfig +++ b/drivers/net/ethernet/cadence/Kconfig@@ -23,7 +23,7 @@ config ARM_AT91_ETHER tristate "AT91RM9200 Ethernet support" depends on ARM && ARCH_AT91RM9200 select NET_CORE - select PHYLIB + select MACB
no the ether and macb are two diferrent drivers for 2 IPs from cadence the ehter does not need the macb Best Regards, J.
quoted hunk ↗ jump to hunk
---help--- If you wish to compile a kernel for the AT91RM9200 and enable ethernet support, then you should always answer Y to this.diff --git a/drivers/net/ethernet/cadence/Makefile b/drivers/net/ethernet/cadence/Makefile index 798b1e0..9068b83 100644 --- a/drivers/net/ethernet/cadence/Makefile +++ b/drivers/net/ethernet/cadence/Makefile@@ -2,5 +2,5 @@ # Makefile for the Atmel network device drivers. # -obj-$(CONFIG_ARM_AT91_ETHER) += at91_ether.o macb.o +obj-$(CONFIG_ARM_AT91_ETHER) += at91_ether.o obj-$(CONFIG_MACB) += macb.o-- 1.7.12.4