[PATCH 2/5] net/at91_ether: select MACB in Kconfig
From: Joachim Eastwood <hidden>
Date: 2012-10-21 14:23:09
Also in:
netdev
Subsystem:
atmel macb ethernet driver, networking drivers, the rest · Maintainers:
Théo Lebrun, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Now that HAVE_NET_MACB is gone let's just select MACB to satisfy the dependecies in at91_ether. PHYLIB will then by selected by MACB. Signed-off-by: Joachim Eastwood <redacted> --- drivers/net/ethernet/cadence/Kconfig | 2 +- drivers/net/ethernet/cadence/Makefile | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/cadence/Kconfig b/drivers/net/ethernet/cadence/Kconfig
index 5d1ea30..f6d0956 100644
--- a/drivers/net/ethernet/cadence/Kconfig
+++ b/drivers/net/ethernet/cadence/Kconfig@@ -23,7 +23,7 @@ config ARM_AT91_ETHER tristate "AT91RM9200 Ethernet support" depends on ARM && ARCH_AT91RM9200 select NET_CORE - select PHYLIB + select MACB ---help--- If you wish to compile a kernel for the AT91RM9200 and enable ethernet support, then you should always answer Y to this.
diff --git a/drivers/net/ethernet/cadence/Makefile b/drivers/net/ethernet/cadence/Makefile
index 798b1e0..9068b83 100644
--- a/drivers/net/ethernet/cadence/Makefile
+++ b/drivers/net/ethernet/cadence/Makefile@@ -2,5 +2,5 @@ # Makefile for the Atmel network device drivers. # -obj-$(CONFIG_ARM_AT91_ETHER) += at91_ether.o macb.o +obj-$(CONFIG_ARM_AT91_ETHER) += at91_ether.o obj-$(CONFIG_MACB) += macb.o
--
1.7.12.4