[PATCH 1/4 V2] ARM: mx28: Add SPI 2 pinmux into imx28.dtsi
From: marex@denx.de (Marek Vasut)
Date: 2012-08-24 23:51:37
Subsystem:
the rest · Maintainer:
Linus Torvalds
Add this SSP port 2 pin multiplexing configuration into the imx28.dtsi file. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chris Ball <redacted> Cc: Fabio Estevam <redacted> Cc: Mark Brown <redacted> Cc: Shawn Guo <redacted> --- arch/arm/boot/dts/imx28.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+) V2: Add only SSP2 pinmux.
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 91b43e9..b996c2d 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi@@ -507,6 +507,19 @@ fsl,voltage = <1>; fsl,pull-up = <0>; }; + + spi2_pins_a: spi2 at 0 { + reg = <0>; + fsl,pinmux-ids = < + 0x2100 /* MX28_PAD_SSP2_SCK__SSP2_SCK */ + 0x2110 /* MX28_PAD_SSP2_MOSI__SSP2_CMD */ + 0x2120 /* MX28_PAD_SSP2_MISO__SSP2_D0 */ + 0x2130 /* MX28_PAD_SSP2_SS0__SSP2_D3 */ + >; + fsl,drive-strength = <1>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; }; digctl at 8001c000 {
--
1.7.10.4