[PATCH v2 13/14] ARM: OMAP5: Add the build support
From: Santosh Shilimkar <hidden>
Date: 2012-07-06 09:21:54
Also in:
linux-omap
Subsystem:
arm port, omap2+ support, the rest · Maintainers:
Russell King, Aaro Koskinen, Andreas Kemnade, Kevin Hilman, Roger Quadros, Tony Lindgren, Linus Torvalds
From: R Sricharan <redacted> Adding the build support required for OMAP5 soc in to omap2+ config. Signed-off-by: Santosh Shilimkar <redacted> Signed-off-by: R Sricharan <redacted> Signed-off-by: Santosh Shilimkar <redacted> --- arch/arm/configs/omap2plus_defconfig | 1 + arch/arm/mach-omap2/Kconfig | 8 +++++++- arch/arm/plat-omap/Kconfig | 4 ++-- 3 files changed, 10 insertions(+), 3 deletions(-)
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 9854ff4..5c90370 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig@@ -236,3 +236,4 @@ CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=y CONFIG_CRC7=y CONFIG_LIBCRC32C=y +CONFIG_SOC_OMAP5=y
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 6c93477..90d0f85 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig@@ -9,7 +9,7 @@ config ARCH_OMAP2PLUS_TYPICAL select REGULATOR select PM_RUNTIME select VFP - select NEON if ARCH_OMAP3 || ARCH_OMAP4 + select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5 select SERIAL_OMAP select SERIAL_OMAP_CONSOLE select I2C
@@ -61,6 +61,12 @@ config ARCH_OMAP4 select USB_ARCH_HAS_EHCI if USB_SUPPORT select ARM_CPU_SUSPEND if PM +config SOC_OMAP5 + bool "TI OMAP5" + select CPU_V7 + select ARM_GIC + select HAVE_SMP + comment "OMAP Core Type" depends on ARCH_OMAP2
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index ad95c7a..dcfb506 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig@@ -29,7 +29,7 @@ config ARCH_OMAP2PLUS select USE_OF select PROC_DEVICETREE if PROC_FS help - "Systems based on OMAP2, OMAP3 or OMAP4" + "Systems based on OMAP2, OMAP3, OMAP4 or OMAP5" endchoice
@@ -150,7 +150,7 @@ config OMAP_32K_TIMER This timer saves power compared to the OMAP_MPU_TIMER, and has support for no tick during idle. The 32KHz timer provides less intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is - currently only available for OMAP16XX, 24XX, 34XX and OMAP4. + currently only available for OMAP16XX, 24XX, 34XX and OMAP4/5. config OMAP3_L2_AUX_SECURE_SAVE_RESTORE bool "OMAP3 HS/EMU save and restore for L2 AUX control register"
--
1.7.9.5