[PATCH V2] ARM: dt: tegra: paz00: add regulators
From: marvin24@gmx.de (Marc Dietrich)
Date: 2012-06-27 21:59:33
Also in:
linux-tegra
On Tuesday 26 June 2012 18:31:00 Stephen Warren wrote:
From: Stephen Warren <redacted> The Toshiba AC100/PAZ00 uses a TPS6586x regulator. Instantiate this. [...] Cc: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Stephen Warren <redacted>
I tested this on paz00 using linux-next and found no issues, so feel free to add ... Tested-By: Marc Dietrich <marvin24@gmx.de>
quoted hunk ↗ jump to hunk
--- v2: * Made all constraints specify a single voltage rather than different min/max, per description above. * Removed vin-supply properties from LDO nodes; the driver and binding need to be updated to support specifying the parent regulators before we can put these into DT. --- arch/arm/boot/dts/tegra20-paz00.dts | 130 +++++++++++++++++++++++++++++++++++ 1 files changed, 130 insertions(+), 0 deletions(-)diff --git a/arch/arm/boot/dts/tegra20-paz00.dtsb/arch/arm/boot/dts/tegra20-paz00.dts index 684a9e1..dccc8b4 100644--- a/arch/arm/boot/dts/tegra20-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts@@ -272,12 +272,142 @@ status = "okay"; clock-frequency = <400000>; + pmic: tps6586x at 34 { + compatible = "ti,tps6586x"; + reg = <0x34>; + interrupts = <0 86 0x4>; + + #gpio-cells = <2>; + gpio-controller; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + regulator at 0 { + reg = <0>; + regulator-compatible = "sm0"; + regulator-name = "+1.2vs_sm0"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + regulator at 1 { + reg = <1>; + regulator-compatible = "sm1"; + regulator-name = "+1.0vs_sm1"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + regulator at 2 { + reg = <2>; + regulator-compatible = "sm2"; + regulator-name = "+3.7vs_sm2"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + }; + + regulator at 3 { + reg = <3>; + regulator-compatible = "ldo0"; + regulator-name = "+3.3vs_ldo0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + regulator at 4 { + reg = <4>; + regulator-compatible = "ldo1"; + regulator-name = "+1.1vs_ldo1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + regulator at 5 { + reg = <5>; + regulator-compatible = "ldo2"; + regulator-name = "+1.2vs_ldo2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + regulator at 6 { + reg = <6>; + regulator-compatible = "ldo3"; + regulator-name = "+3.3vs_ldo3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + regulator at 7 { + reg = <7>; + regulator-compatible = "ldo4"; + regulator-name = "+1.8vs_ldo4"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + regulator at 8 { + reg = <8>; + regulator-compatible = "ldo5"; + regulator-name = "+2.85vs_ldo5"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + regulator at 9 { + reg = <9>; + regulator-compatible = "ldo6"; + regulator-name = "+2.85vs_ldo6"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + regulator at 10 { + reg = <10>; + regulator-compatible = "ldo7"; + regulator-name = "+3.3vs_ldo7"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + regulator at 11 { + reg = <11>; + regulator-compatible = "ldo8"; + regulator-name = "+1.8vs_ldo8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + regulator at 12 { + reg = <12>; + regulator-compatible = "ldo9"; + regulator-name = "+2.85vs_ldo9"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + }; + }; + adt7461 at 4c { compatible = "adi,adt7461"; reg = <0x4c>; }; }; + pmc { + nvidia,invert-interrupt; + }; + usb at c5000000 { status = "okay"; };