[PATCH v4 09/12] arm/dts: omap4-panda: Add twl6030 and i2c EEPROM
From: Benoit Cousson <hidden>
Date: 2011-12-22 14:59:03
Also in:
linux-devicetree, linux-i2c, linux-omap, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
Update pandaboard dts file with required clock frequencies for the i2c client devices existing on pandaboard. Add the twl6030 node in i2c1 controller. This is the minimal support needed to boot OMAP4 boards without any crash. The support for all the features included in this MFD will be added later. Add a generic i2c EEPROM entry. Signed-off-by: Benoit Cousson <redacted> Cc: Grant Likely <redacted> --- arch/arm/boot/dts/omap4-panda.dts | 34 ++++++++++++++++++++++++++++++++++ 1 files changed, 34 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts
index 9755ad5..29646dc 100644
--- a/arch/arm/boot/dts/omap4-panda.dts
+++ b/arch/arm/boot/dts/omap4-panda.dts@@ -18,3 +18,37 @@ reg = <0x80000000 0x40000000>; /* 1 GB */ }; }; + +&i2c1 { + clock-frequency = <400000>; + + twl: twl at 48 { + reg = <0x48>; + /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */ + interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */ + interrupt-parent = <&gic>; + }; +}; + +/include/ "twl6030.dtsi" + +&i2c2 { + clock-frequency = <400000>; +}; + +&i2c3 { + clock-frequency = <100000>; + + /* + * Display monitor features are burnt in their EEPROM as EDID data. + * The EEPROM is connected as I2C slave device. + */ + eeprom at 50 { + compatible = "ti,eeprom"; + reg = <0x50>; + }; +}; + +&i2c4 { + clock-frequency = <400000>; +};
--
1.7.0.4