[PATCH v4 06/12] arm/dts: OMAP3: Add i2c controller nodes
STALE5380d
From: Benoit Cousson <hidden>
Date: 2011-12-22 14:58:57
Also in:
linux-devicetree, linux-i2c, linux-omap, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
Revision v4 of 4 in this series.
Revisions (4)
- v1 [diff vs current]
- v2 [diff vs current]
- v3 [diff vs current]
- v4 current
Add i2c controllers nodes into the main ocp bus. Signed-off-by: Benoit Cousson <redacted> Cc: Grant Likely <redacted> Cc: Rob Herring <redacted> --- arch/arm/boot/dts/omap3.dtsi | 21 +++++++++++++++++++++ 1 files changed, 21 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 6866dc7..697b210 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi@@ -61,5 +61,26 @@ ti,intc-size = <96>; reg = <0x48200000 0x1000>; }; + + i2c1: i2c at 1 { + compatible = "ti,omap3-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c1"; + }; + + i2c2: i2c at 2 { + compatible = "ti,omap3-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c2"; + }; + + i2c3: i2c at 3 { + compatible = "ti,omap3-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c3"; + }; }; };
--
1.7.0.4