[PATCH 09/13] arm/dts: omap4-sdp: Add twl6030 node
From: Benoit Cousson <hidden>
Date: 2011-09-01 17:21:25
Also in:
linux-devicetree, linux-omap
Subsystem:
the rest · Maintainer:
Linus Torvalds
Add the twl6030 node inside the i2c1 controller node. Add the RTC submodule inside the twl node. This is just the minimal support needed to boot OMAP4 boards without any crash. The support for all the features included in this MFD will be added later. Signed-off-by: Benoit Cousson <redacted> Cc: Grant Likely <redacted> --- arch/arm/boot/dts/omap4-sdp.dts | 25 +++++++++++++++++++++++-- 1 files changed, 23 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index ed85b35..d03f2e7 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts@@ -26,12 +26,33 @@ device_type = "memory"; reg = <0x80000000 0x40000000>; /* 1 GB */ }; - - }; &i2c1 { clock-frequency = <400000>; + + /* + * Integrated Power Management Chip + * http://www.ti.com/lit/ds/symlink/twl6030.pdf + */ + twl at 48 { + compatible = "ti,twl6030"; + reg = <0x48>; + interrupts = <39>; /* IRQ_SYS_1N cascaded to gic */ + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + /* twl is a MFD, so it will contain a bunch of sub-ips */ + #address-cells = <1>; + #size-cells = <0>; + ranges = <0 0x48>; + + twl_rtc { + compatible = "ti,twl_rtc"; + interrupts = <11>; + reg = <0>; + }; + }; }; &i2c2 {
--
1.7.0.4