[RFC PATCH 2/3] pinctrl: imx: add pinmux-imx53 support

On Mon, Dec 05, 2011 at 10:43:02AM +0800, Dong Aisheng wrote:

Hi Sascha,

2011/12/5 Sascha Hauer [off-list ref]:

quoted

On Sun, Dec 04, 2011 at 07:49:43PM +0800, Dong Aisheng wrote:

quoted

Signed-off-by: Dong Aisheng <redacted>
Cc: Linus Walleij <redacted>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Shawn Guo <redacted>
---
?drivers/pinctrl/pinmux-imx53.c | ?514 ++++++++++++++++++++++++++++++++++++++++
?1 files changed, 514 insertions(+), 0 deletions(-)

diff --git a/drivers/pinctrl/pinmux-imx53.c b/drivers/pinctrl/pinmux-imx53.c
+
+/* mx53 pin groups and mux mode */
+static const unsigned mx53_fec_pins[] = {
+ ? ? MX53_FEC_MDC,
+ ? ? MX53_FEC_MDIO,
+ ? ? MX53_FEC_REF_CLK,
+ ? ? MX53_FEC_RX_ER,
+ ? ? MX53_FEC_CRS_DV,
+ ? ? MX53_FEC_RXD1,
+ ? ? MX53_FEC_RXD0,
+ ? ? MX53_FEC_TX_EN,
+ ? ? MX53_FEC_TXD1,
+ ? ? MX53_FEC_TXD0,
+};
+static const unsigned mx53_fec_mux[] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };

The FEC_MDC could be routed to PAD_KEY_ROW2 or to PAD_FEC_MDC. Also
FEC_MDIO could be routed to either PAD_FEC_MDIO or to PAD_KEY_COL2.
For other fec pins also different options might exist. How does this
fit into this group scheme?

Thanks for the review.
Here it's only one group for fec function.
If i understood right, for current pinmux desgin, pins are arranged in
groups per specifc functions.
For the case FEC_MDC could be routed to KEY_ROW2, we need define a KEY group
for key function.

Currently, i only added one group for one function with the reference
of MX53 LOCO pinmux defines.
And it's a big work which is in the TODO list that for me to manually
add all possible functions and pin groups.
So I send out the patch first to see if any design issue for the FSL
iomux specialist.

quoted

quoted

+
+static const unsigned mx53_sd1_pins[] = {
+ ? ? MX53_SD1_CMD,
+ ? ? MX53_SD1_CLK,
+ ? ? MX53_SD1_DATA0,
+ ? ? MX53_SD1_DATA1,
+ ? ? MX53_SD1_DATA2,
+ ? ? MX53_SD1_DATA3,
+
+};
+static const unsigned mx53_sd1_mux[] = { 0, 0, 0, 0, 0, 0 };
+
+static const unsigned mx53_sd3_pins[] = {
+ ? ? MX53_PATA_DATA8,
+ ? ? MX53_PATA_DATA9,
+ ? ? MX53_PATA_DATA10,
+ ? ? MX53_PATA_DATA11,
+ ? ? MX53_PATA_DATA0,
+ ? ? MX53_PATA_DATA1,
+ ? ? MX53_PATA_DATA2,
+ ? ? MX53_PATA_DATA3,
+ ? ? MX53_PATA_IORDY,
+ ? ? MX53_PATA_RESET_B,
+
+};
+static const unsigned mx53_sd3_mux[] = { 4, 4, 4, 4, 4, 4, 4, 4, 2, 2 };
+
+static const unsigned mx53_uart1_pins[] = {
+ ? ? MX53_CSI0_DAT10,
+ ? ? MX53_CSI0_DAT11,
+};
+static const unsigned mx53_uart1_mux[] = { 2, 2 };

For uart1 indeed only one routing possibility exists, but look at uart2:

uart2 txd -> PAD_EIM_D26
? ? ? ? ?-> PAD_PATA_DMARQ
? ? ? ? ?-> PAD_GPIO_7

uart2 rxd -> PAD_EIM_D27
? ? ? ? ?-> PAD_PATA_BUFFER_EN
? ? ? ? ?-> PAD_GPIO_8

So this at least means that you should not name the array above
mx53_uart1_mux, but something like mx53_uart1_option1,
mx53_uart1_option2 and so on.

Yes, acked on this.
I may take this name option.

BTW the name _option1 was only meant as an example. mx53_uart2_eim,
mx53_uart2_pata might make more sense.

quoted

Then it's probably possible to use mixtures of different options
for the uart.

How mixture?
Can you describe more or give an example?

For example a board might have uart2 txd -> PAD_EIM_D26 and uart2 rxd ->
PAD_PATA_BUFFER_EN. I don't know if this is done somewhere, but it's
technically possible.

quoted

I don't think that this grouping of pads to their functions makes
sense. On i.MX every pad is muxed independently and not in groups.
Which pins belong to which function is board specific and not SoC
specific.

Yes, i noted this.
As i said above, pins seem to be arranged in groups per functions not
per pins itself.
So our to do is define all possible pin function and group for board to use.
But obviously, it's a big work. Especially for your UART2 work, it
might be a headache since many possible combination of pins.
I still not find the good idea.
My current plan is to define all (might be frequently) used functoin
and groups for the exist upstreamed board like 53 Loco and etc, is
that ok?

As said, I don't think that it's a good idea to group pins together on a
per SoC base. I rather think that if we want to go for groups of pins
belonging to a device, the board has to define those groups, not the
SoC.
If you really want to go for SoC specific Pins groups I don't
necessarily want to see 'everything for LOCO', I rather want to see
'everything for uart2', including RTS/CTS, modem control pins (if
applicable) and an example of using those pins as gpio. Another
interesting thing is the IPU. While a UART might have three groups
(rxd+txd, rts+cts, dtr+dcd+dsr) the IPU groups are not so easy to
identify. We have pins for two displays, each of them might be 8bit,
15bit, 18bit or 24bit. There are different sync signals for each
display, some of them maybe unused on certain setups. The unused pins
shouldn't be in the groups as you could use them as gpios instead.
By putting the iomux pins in SoC specific groups you try to press the
hardware into a software design for which it is not designed for. It
will always be easy to find a case which is not covered by any of
the predefined groups.

Sascha


-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |