[PATCH] omap4: Fix ULPI PHY init for ES1.0 SDP (Re: 4430SDP boot failure)

Tony Lindgren wrote:

* Anand Gadiyar [off-list ref] [110201 04:54]:

quoted

I believe this fix is fixing your reboot issue, but it's breaking
EHCI support on the SDP.

The MODE4 above should really be MODE3 - all GPIOs are on MODE3.
By changing

The patch snippet below fixes EHCI on the SDP, but I believe that
making this change will reintroduce the "board reboots" issue
you originally reported. Could you check and tell me if this
is the case?

Hmm sorry looks like I made a typo there. That should be fixed.

quoted

Just curious - is your board a Blaze, or an SDP?

It's a ES1.0 blaze, with the patch below it reboots early
during the boot. I also have to disable omap_l2_cache_init
on this board to get it to boot.

...

Maybe there should be a check for ES1.0 for the USB also?

Looks like a bug on the Blaze boards. There's a large capacitor
on the rails that starts charging when we try to power the USB PHY.
The inrush current is quite high and this causes the reboot.

The capacitor is on the big motherboard called the application
board, so it's independent of the silicon rev. I'm not sure
which revs are affected - I'll try and find out more about the
issue to see if I can come up with a better fix.


- Anand