[PATCH] omap4: Fix ULPI PHY init for ES1.0 SDP (Re: 4430SDP boot failure)
From: tony@atomide.com (Tony Lindgren)
Date: 2011-02-02 01:10:07
Also in:
linux-omap
* Anand Gadiyar [off-list ref] [110201 04:54]:
I believe this fix is fixing your reboot issue, but it's breaking EHCI support on the SDP. The MODE4 above should really be MODE3 - all GPIOs are on MODE3. By changing The patch snippet below fixes EHCI on the SDP, but I believe that making this change will reintroduce the "board reboots" issue you originally reported. Could you check and tell me if this is the case?
Hmm sorry looks like I made a typo there. That should be fixed.
Just curious - is your board a Blaze, or an SDP?
It's a ES1.0 blaze, with the patch below it reboots early during the boot. I also have to disable omap_l2_cache_init on this board to get it to boot.
quoted hunk ↗ jump to hunk
diff --git a/arch/arm/mach-omap2/board-4430sdp.cb/arch/arm/mach-omap2/board-4430sdp.c index 07d1b20..ab9fb4d 100644--- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c@@ -554,7 +554,7 @@ static void __init omap_sfh7741prox_init(void) #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { - OMAP4_MUX(USBB2_ULPITLL_CLK, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), + OMAP4_MUX(USBB2_ULPITLL_CLK, OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT), { .reg_offset = OMAP_MUX_TERMINATOR }, }; #else
Maybe there should be a check for ES1.0 for the USB also? Tony