@@ -365,15 +365,15 @@ static struct clk uart_clk = {
 	.recalc = &follow_parent,
 };
 
-/* sd configurations */
-static struct aux_clk_config sd_synth_config = {
-	.synth_reg = SD_CLK_SYNT,
+/* sdhci configurations */
+static struct aux_clk_config sdhci_synth_config = {
+	.synth_reg = SDHCI_CLK_SYNT,
 	.masks = &aux_masks,
 };
 
-/* sd synth clock */
-static struct clk sd_synth_clk = {
-	.en_reg = SD_CLK_SYNT,
+/* sdhci synth clock */
+static struct clk sdhci_synth_clk = {
+	.en_reg = SDHCI_CLK_SYNT,
 	.en_reg_bit = AUX_SYNT_ENB,
 	.pclk = &pll1div2_clk,
 	.calc_rate = &aux_calc_rate,

@@ -383,11 +383,11 @@ static struct clk sd_synth_clk = {
 	.private_data = &sdhci_synth_config,
 };
 
-/* sd clock */
-static struct clk sd_clk = {
+/* sdhci clock */
+static struct clk sdhci_clk = {
 	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = SD_CLK_ENB,
-	.pclk = &sd_synth_clk,
+	.en_reg_bit = SDHCI_CLK_ENB,
+	.pclk = &sdhci_synth_clk,
 	.recalc = &follow_parent,
 };
 

@@ -833,7 +833,7 @@ static struct clk_lookup spear_clk_lookups[] = {
 	{.con_id = "gmii_txclk123_pad_clk",	.clk = &gmii_txclk125_pad},
 	{.con_id = "clcd_synth_clk",		.clk = &clcd_synth_clk},
 	{.con_id = "uart_synth_clk",		.clk = &uart_synth_clk},
-	{.con_id = "sd_synth_clk",		.clk = &sd_synth_clk},
+	{.con_id = "sdhci_synth_clk",		.clk = &sdhci_synth_clk},
 	{.con_id = "cfxd_synth_clk",		.clk = &cfxd_synth_clk},
 	{.con_id = "gmac_phy_input_clk",	.clk = &gmac_phy_input_clk},
 	{.con_id = "gmac_phy_synth_clk",	.clk = &gmac_phy_synth_clk},

@@ -862,7 +862,7 @@ static struct clk_lookup spear_clk_lookups[] = {
 	{.dev_id = "pcie1",		.clk = &pcie1_clk},
 	{.dev_id = "pcie2",		.clk = &pcie2_clk},
 	{.dev_id = "cfxd",		.clk = &cfxd_clk},
-	{.dev_id = "sd",		.clk = &sd_clk},
+	{.dev_id = "sdhci",		.clk = &sdhci_clk},
 	{.con_id = "fsmc",		.clk = &fsmc_clk},
 	{.dev_id = "sysram0",		.clk = &sysram0_clk},
 	{.dev_id = "sysram1",		.clk = &sysram1_clk},

@@ -40,6 +40,7 @@ extern struct platform_device nand_device;
 extern struct platform_device ohci0_device;
 extern struct platform_device ohci1_device;
 extern struct platform_device rtc_device;
+extern struct platform_device sdhci_device;
 extern struct platform_device smi_device;
 extern struct sys_timer spear13xx_timer;
 

@@ -45,7 +45,7 @@
 #define IRQ_GPIO1		(IRQ_SHPI_START + 25)
 #define IRQ_PLAY_I2S1		(IRQ_SHPI_START + 26)
 #define IRQ_JPEG		(IRQ_SHPI_START + 27)
-#define IRQ_MMC			(IRQ_SHPI_START + 28)
+#define IRQ_SDHCI		(IRQ_SHPI_START + 28)
 #define IRQ_CF			(IRQ_SHPI_START + 29)
 #define IRQ_SMI			(IRQ_SHPI_START + 30)
 #define IRQ_SSP			(IRQ_SHPI_START + 31)

@@ -120,7 +120,7 @@
 
 #define UART_CLK_SYNT		((unsigned int *)(MISC_BASE + 0x254))
 #define GMAC_CLK_SYNT		((unsigned int *)(MISC_BASE + 0x258))
-#define SD_CLK_SYNT		((unsigned int *)(MISC_BASE + 0x25c))
+#define SDHCI_CLK_SYNT		((unsigned int *)(MISC_BASE + 0x25c))
 #define CFXD_CLK_SYNT		((unsigned int *)(MISC_BASE + 0x260))
 #define RAS_CLK_SYNT0		((unsigned int *)(MISC_BASE + 0x264))
 #define RAS_CLK_SYNT1		((unsigned int *)(MISC_BASE + 0x268))

@@ -145,7 +145,7 @@
 	#define SYSRAM0_CLK_ENB		3
 	#define FSMC_CLK_ENB		4
 	#define SMI_CLK_ENB		5
-	#define SD_CLK_ENB		6
+	#define SDHCI_CLK_ENB		6
 	#define CFXD_CLK_ENB		7
 	#define GMAC_CLK_ENB		8
 	#define UHC0_CLK_ENB		9

@@ -84,7 +84,7 @@
 #define SPEAR13XX_FSMC_BASE		0xB0000000
 #define SPEAR13XX_JPEG_BASE		0xB2000000
 #define SPEAR13XX_MCIF_CF_BASE		0xB2800000
-#define SPEAR13XX_MCIF_MMC_BASE		0xB3000000
+#define SPEAR13XX_MCIF_SDHCI_BASE	0xB3000000
 
 /* Debug uart for linux, will be used for debug and uncompress messages */
 #define SPEAR_DBG_UART_BASE		SPEAR13XX_UART_BASE

@@ -42,6 +42,7 @@ static struct platform_device *plat_devs[] __initdata = {
 	&ohci0_device,
 	&ohci1_device,
 	&rtc_device,
+	&sdhci_device,
 	&smi_device,
 };
 

@@ -377,6 +377,28 @@ int enable_pcie0_clk(void)
 }
 #endif
 
+/* sdhci (sdio) device declaration */
+static struct resource sdhci_resources[] = {
+	{
+		.start	= SPEAR13XX_MCIF_SDHCI_BASE,
+		.end	= SPEAR13XX_MCIF_SDHCI_BASE + SZ_256 - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_SDHCI,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device sdhci_device = {
+	.dev = {
+		.coherent_dma_mask = ~0,
+	},
+	.name = "sdhci",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(sdhci_resources),
+	.resource = sdhci_resources,
+};
+
 /* Do spear13xx familiy common initialization part here */
 void __init spear13xx_init(void)
 {

@@ -525,6 +525,16 @@ static struct clk fsmc_clk = {
 };
 #endif
 
+/* common clocks to spear300 and spear320 */
+#if defined(CONFIG_MACH_SPEAR300) || defined(CONFIG_MACH_SPEAR320)
+/* sdhci clock */
+static struct clk sdhci_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk = &ahb_clk,
+	.recalc = &follow_parent,
+};
+#endif /* CONFIG_MACH_SPEAR300 || CONFIG_MACH_SPEAR320 */
+
 /* spear300 machine specific clock structures */
 #ifdef CONFIG_MACH_SPEAR300
 /* keyboard clock */

@@ -618,6 +628,11 @@ static struct clk_lookup spear_clk_lookups[] = {
 	{ .dev_id = "i2c_designware.1",	.clk = &i2c1_clk},
 	{ .dev_id = "pwm",		.clk = &pwm_clk},
 #endif
+
+	/* common clock to spear300 and spear320 */
+#if defined(CONFIG_MACH_SPEAR300) || defined(CONFIG_MACH_SPEAR320)
+	{ .dev_id = "sdhci",	.clk = &sdhci_clk},
+#endif /* CONFIG_MACH_SPEAR300 || CONFIG_MACH_SPEAR320 */
 };
 
 void __init clk_init(void)

@@ -116,6 +116,7 @@ extern struct platform_device nand0_device;
 extern struct platform_device nand1_device;
 extern struct platform_device nand2_device;
 extern struct platform_device nand3_device;
+extern struct platform_device sdhci_device;
 
 /* pad mux modes */
 extern struct pmx_mode nand_mode;

@@ -144,12 +145,15 @@ extern struct pmx_dev pmx_telecom_camera;
 extern struct pmx_dev pmx_telecom_dac;
 extern struct pmx_dev pmx_telecom_i2s;
 extern struct pmx_dev pmx_telecom_boot_pins;
-extern struct pmx_dev pmx_telecom_sdio_4bit;
-extern struct pmx_dev pmx_telecom_sdio_8bit;
+extern struct pmx_dev pmx_telecom_sdhci_4bit;
+extern struct pmx_dev pmx_telecom_sdhci_8bit;
 extern struct pmx_dev pmx_gpio1;
 
 /* Add spear300 machine function declarations here */
 void __init spear300_init(void);
+#define SDHCI_MEM_ENB	0x1
+#define I2S_MEM_ENB	0x2
+void sdhci_i2s_mem_enable(u8 mask);
 
 /* Add misc structure declarations here */
 extern struct clcd_board clcd_plat_data;

@@ -182,6 +186,7 @@ extern struct platform_device i2c1_device;
 extern struct platform_device nand_device;
 extern struct platform_device plgpio_device;
 extern struct platform_device pwm_device;
+extern struct platform_device sdhci_device;
 
 /* pad mux modes */
 extern struct pmx_mode auto_net_smii_mode;

@@ -194,14 +199,14 @@ extern struct pmx_dev pmx_clcd;
 extern struct pmx_dev pmx_emi;
 extern struct pmx_dev pmx_fsmc;
 extern struct pmx_dev pmx_spp;
-extern struct pmx_dev pmx_sdio;
+extern struct pmx_dev pmx_sdhci;
 extern struct pmx_dev pmx_i2s;
 extern struct pmx_dev pmx_uart1;
 extern struct pmx_dev pmx_uart1_modem;
 extern struct pmx_dev pmx_uart2;
 extern struct pmx_dev pmx_touchscreen;
 extern struct pmx_dev pmx_can;
-extern struct pmx_dev pmx_sdio_led;
+extern struct pmx_dev pmx_sdhci_led;
 extern struct pmx_dev pmx_pwm0;
 extern struct pmx_dev pmx_pwm1;
 extern struct pmx_dev pmx_pwm2;

@@ -69,7 +69,7 @@
 #define IRQ_CLCD				IRQ_GEN_RAS_3
 
 /* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
-#define IRQ_SDIO				IRQ_INTRCOMM_RAS_ARM
+#define IRQ_SDHCI				IRQ_INTRCOMM_RAS_ARM
 
 /* GPIO pins virtual irqs */
 #define SPEAR_GPIO_INT_BASE			(VIRQ_START + 9)

@@ -115,7 +115,7 @@
 #define VIRQ_SPP				(VIRQ_START + 2)
 
 /* IRQs sharing IRQ_GEN_RAS_2 */
-#define IRQ_SDIO				IRQ_GEN_RAS_2
+#define IRQ_SDHCI				IRQ_GEN_RAS_2
 
 /* IRQs sharing IRQ_GEN_RAS_3 */
 #define VIRQ_PLGPIO				(VIRQ_START + 3)

@@ -39,8 +39,8 @@
 #define SPEAR300_CLCD_BASE		0x60000000
 #define SPEAR300_CLCD_SIZE		0x10000000
 
-#define SPEAR300_SDIO_BASE		0x70000000
-#define SPEAR300_SDIO_SIZE		0x10000000
+#define SPEAR300_SDHCI_BASE		0x70000000
+#define SPEAR300_SDHCI_SIZE		0x10000000
 
 #define SPEAR300_NAND_0_BASE		0x80000000
 #define SPEAR300_NAND_0_SIZE		0x04000000

@@ -28,8 +28,8 @@
 #define SPEAR320_I2S_BASE		0x60000000
 #define SPEAR320_I2S_SIZE		0x10000000
 
-#define SPEAR320_SDIO_BASE		0x70000000
-#define SPEAR320_SDIO_SIZE		0x10000000
+#define SPEAR320_SDHCI_BASE		0x70000000
+#define SPEAR320_SDHCI_SIZE		0x10000000
 
 #define SPEAR320_CLCD_BASE		0x90000000
 #define SPEAR320_CLCD_SIZE		0x10000000

@@ -77,7 +77,7 @@
 #define EMI_IRQ_MASK			(1 << 7)
 #define CLCD_IRQ_MASK			(1 << 8)
 #define SPP_IRQ_MASK			(1 << 9)
-#define SDIO_IRQ_MASK			(1 << 10)
+#define SDHCI_IRQ_MASK			(1 << 10)
 #define CAN_U_IRQ_MASK			(1 << 11)
 #define CAN_L_IRQ_MASK			(1 << 12)
 #define UART1_IRQ_MASK			(1 << 13)

@@ -311,7 +311,7 @@ struct pmx_dev pmx_telecom_boot_pins = {
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_telecom_sdio_4bit_modes[] = {
+struct pmx_dev_mode pmx_telecom_sdhci_4bit_modes[] = {
 	{
 		.ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE |
 			HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE |

@@ -324,14 +324,14 @@ struct pmx_dev_mode pmx_telecom_sdio_4bit_modes[] = {
 	},
 };
 
-struct pmx_dev pmx_telecom_sdio_4bit = {
-	.name = "telecom_sdio_4bit",
-	.modes = pmx_telecom_sdio_4bit_modes,
-	.mode_count = ARRAY_SIZE(pmx_telecom_sdio_4bit_modes),
+struct pmx_dev pmx_telecom_sdhci_4bit = {
+	.name = "telecom_sdhci_4bit",
+	.modes = pmx_telecom_sdhci_4bit_modes,
+	.mode_count = ARRAY_SIZE(pmx_telecom_sdhci_4bit_modes),
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_telecom_sdio_8bit_modes[] = {
+struct pmx_dev_mode pmx_telecom_sdhci_8bit_modes[] = {
 	{
 		.ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE |
 			HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE |

@@ -343,10 +343,10 @@ struct pmx_dev_mode pmx_telecom_sdio_8bit_modes[] = {
 	},
 };
 
-struct pmx_dev pmx_telecom_sdio_8bit = {
-	.name = "telecom_sdio_8bit",
-	.modes = pmx_telecom_sdio_8bit_modes,
-	.mode_count = ARRAY_SIZE(pmx_telecom_sdio_8bit_modes),
+struct pmx_dev pmx_telecom_sdhci_8bit = {
+	.name = "telecom_sdhci_8bit",
+	.modes = pmx_telecom_sdhci_8bit_modes,
+	.mode_count = ARRAY_SIZE(pmx_telecom_sdhci_8bit_modes),
 	.enb_on_reset = 1,
 };
 

@@ -524,6 +524,28 @@ struct platform_device nand3_device = {
 	.dev.platform_data = &nand3_platform_data,
 };
 
+/* sdhci (sdio) device declaration */
+static struct resource sdhci_resources[] = {
+	{
+		.start	= SPEAR300_SDHCI_BASE,
+		.end	= SPEAR300_SDHCI_BASE + SZ_256 - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_SDHCI,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device sdhci_device = {
+	.dev = {
+		.coherent_dma_mask = ~0,
+	},
+	.name = "sdhci",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(sdhci_resources),
+	.resource = sdhci_resources,
+};
+
 /* spear3xx shared irq */
 struct shirq_dev_config shirq_ras1_config[] = {
 	{

@@ -577,6 +599,26 @@ struct spear_shirq shirq_ras1 = {
 	},
 };
 
+/* Function handling sdhci and i2s memory sharing */
+#define SDHCI_MEM_SELECT	0x20000000
+void sdhci_i2s_mem_enable(u8 mask)
+{
+	u32 val;
+	void __iomem *base = ioremap(SPEAR300_SOC_CONFIG_BASE,
+			SPEAR300_SOC_CONFIG_SIZE);
+	if (!base) {
+		pr_debug("sdhci_i2s_enb: ioremap fail\n");
+		return;
+	}
+
+	val = readl(base + MODE_CONFIG_REG);
+	if (mask == SDHCI_MEM_ENB)
+		val |= SDHCI_MEM_SELECT;
+	else
+		val &= ~SDHCI_MEM_SELECT;
+	writel(val, base + MODE_CONFIG_REG);
+}
+
 /* spear300 routines */
 void __init spear300_init(void)
 {

@@ -16,6 +16,7 @@
 #include <asm/mach-types.h>
 #include <linux/spi/flash.h>
 #include <linux/spi/spi.h>
+#include <linux/mmc/sdhci-spear.h>
 #include <mach/generic.h>
 #include <mach/gpio.h>
 #include <mach/spear.h>

@@ -36,7 +37,7 @@ static struct pmx_dev *pmx_devs[] = {
 	/* spear300 specific devices */
 	&pmx_fsmc_2_chips,
 	&pmx_clcd,
-	&pmx_telecom_sdio_4bit,
+	&pmx_telecom_sdhci_4bit,
 	&pmx_gpio1,
 };
 

@@ -64,6 +65,15 @@ static struct platform_device *plat_devs[] __initdata = {
 
 	/* spear300 specific devices */
 	&kbd_device,
+	&sdhci_device,
+};
+
+/* sdhci board specific information */
+static struct sdhci_plat_data sdhci_plat_data = {
+	.card_power_gpio = RAS_GPIO_2,
+	.power_active_high = 0,
+	.power_always_enb = 0,
+	.card_int_gpio = RAS_GPIO_0,
 };
 
 /* keyboard specific platform data */

@@ -134,6 +144,12 @@ static void __init spear300_evb_init(void)
 	nand_set_plat_data(&nand0_device, NULL, 0, NAND_SKIP_BBTSCAN,
 			SPEAR_NAND_BW8);
 
+	/* set sdhci device platform data */
+	sdhci_set_plat_data(&sdhci_device, &sdhci_plat_data);
+
+	/* Enable sdhci memory */
+	sdhci_i2s_mem_enable(SDHCI_MEM_ENB);
+
 	/* call spear300 machine init function */
 	spear300_init();
 

@@ -13,6 +13,8 @@
 
 #include <linux/amba/pl022.h>
 #include <linux/ptrace.h>
+#include <linux/types.h>
+#include <linux/mmc/sdhci-spear.h>
 #include <asm/irq.h>
 #include <mach/generic.h>
 #include <mach/spear.h>

@@ -113,7 +115,7 @@ struct pmx_dev pmx_spp = {
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_sdio_modes[] = {
+struct pmx_dev_mode pmx_sdhci_modes[] = {
 	{
 		.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE |
 			SMALL_PRINTERS_MODE,

@@ -121,10 +123,10 @@ struct pmx_dev_mode pmx_sdio_modes[] = {
 	},
 };
 
-struct pmx_dev pmx_sdio = {
-	.name = "sdio",
-	.modes = pmx_sdio_modes,
-	.mode_count = ARRAY_SIZE(pmx_sdio_modes),
+struct pmx_dev pmx_sdhci = {
+	.name = "sdhci",
+	.modes = pmx_sdhci_modes,
+	.mode_count = ARRAY_SIZE(pmx_sdhci_modes),
 	.enb_on_reset = 1,
 };
 

@@ -218,17 +220,17 @@ struct pmx_dev pmx_can = {
 	.enb_on_reset = 1,
 };
 
-struct pmx_dev_mode pmx_sdio_led_modes[] = {
+struct pmx_dev_mode pmx_sdhci_led_modes[] = {
 	{
 		.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
 		.mask = PMX_SSP_CS_MASK,
 	},
 };
 
-struct pmx_dev pmx_sdio_led = {
-	.name = "sdio_led",
-	.modes = pmx_sdio_led_modes,
-	.mode_count = ARRAY_SIZE(pmx_sdio_led_modes),
+struct pmx_dev pmx_sdhci_led = {
+	.name = "sdhci_led",
+	.modes = pmx_sdhci_led_modes,
+	.mode_count = ARRAY_SIZE(pmx_sdhci_led_modes),
 	.enb_on_reset = 1,
 };
 

@@ -536,6 +538,27 @@ struct platform_device pwm_device = {
 	.resource = pwm_resources,
 };
 
+/* sdhci (sdio) device registeration */
+static struct resource sdhci_resources[] = {
+	{
+		.start	= SPEAR320_SDHCI_BASE,
+		.end	= SPEAR320_SDHCI_BASE + SZ_256 - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_SDHCI,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device sdhci_device = {
+	.dev = {
+		.coherent_dma_mask = ~0,
+	},
+	.name = "sdhci",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(sdhci_resources),
+	.resource = sdhci_resources,
+};
 
 /* spear3xx shared irq */
 struct shirq_dev_config shirq_ras1_config[] = {

@@ -15,6 +15,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 #include <linux/spi/flash.h>
+#include <linux/mmc/sdhci-spear.h>
 #include <linux/spi/spi.h>
 #include <mach/generic.h>
 #include <mach/gpio.h>

@@ -33,7 +34,7 @@ static struct pmx_dev *pmx_devs[] = {
 
 	/* spear320 specific devices */
 	&pmx_fsmc,
-	&pmx_sdio,
+	&pmx_sdhci,
 	&pmx_i2s,
 	&pmx_uart1,
 	&pmx_uart2,

@@ -68,6 +69,15 @@ static struct platform_device *plat_devs[] __initdata = {
 	&i2c1_device,
 	&plgpio_device,
 	&pwm_device,
+	&sdhci_device,
+};
+
+/* sdhci board specific information */
+static struct sdhci_plat_data sdhci_plat_data = {
+	.card_power_gpio = PLGPIO_61,
+	.power_active_high = 0,
+	.power_always_enb = 1,
+	.card_int_gpio = -1,
 };
 
 /* Currently no gpios are free on eval board so it is kept commented */

@@ -114,6 +124,9 @@ static void __init spear320_evb_init(void)
 {
 	unsigned int i;
 
+	/* set sdhci device platform data */
+	sdhci_set_plat_data(&sdhci_device, &sdhci_plat_data);
+
 	/* padmux initialization, must be done before spear320_init */
 	pmx_driver.mode = &auto_net_mii_mode;
 	pmx_driver.devs = pmx_devs;