Re: [PATCH 8/9] sha1-file: use loose object cache for quick existence check

On Mon, Nov 12 2018, Jeff King wrote:

On Mon, Nov 12, 2018 at 05:01:02PM +0100, Ævar Arnfjörð Bjarmason wrote:

quoted

quoted

There's some obvious hand-waving in the paragraphs above. I would love
it if somebody with an NFS system could do some before/after timings
with various numbers of loose objects, to get a sense of where the
breakeven point is.

My gut is that we do not need the complexity of a cache-size limit, nor
of a config option to disable this. But it would be nice to have a real
number where "reasonable" ends and "pathological" begins. :)

I'm happy to test this on some of the NFS we have locally, and started
out with a plan to write some for-loop using the low-level API (so it
would look up all 256), fake populate .git/objects/?? with N number of
objects etc, but ran out of time.

Do you have something ready that you think would be representative and I
could just run? If not I'll try to pick this up again...

No, but they don't even really need to be actual objects. So I suspect
something like:

  git init
  for i in $(seq 256); do
    i=$(printf %02x $i)
    mkdir -p .git/objects/$i
    for j in $(seq --format=%038g 1000); do
      echo foo >.git/objects/$i/$j
    done
  done
  git index-pack -v --stdin </path/to/git.git/objects/pack/XYZ.pack

might work (for various values of 1000). The shell loop would probably
be faster as perl, too. :)

Make sure you clear the object directory between runs, though (otherwise
the subsequent index-pack's really do find collisions and spend time
accessing the objects).

If you want real objects, you could probably just dump a bunch of
sequential blobs to fast-import, and then pipe the result to
unpack-objects.

-Peff

I did a very ad-hoc test against a NetApp filer using the test script
quoted at the end of this E-Mail. The test compared origin/master, this
branch of yours, and my core.checkCollisions=false branch.

When run with DBD-mysql.git (just some random ~1k commit repo I had):

    $ GIT_PERF_REPEAT_COUNT=3 GIT_PERF_MAKE_OPTS='-j56 CFLAGS="-O3"' ./run origin/master peff/jk/loose-cache avar/check-collisions-config p0008-index-pack.sh

I get:

    Test                                             origin/master     peff/jk/loose-cache      avar/check-collisions-config
    ------------------------------------------------------------------------------------------------------------------------
    0008.2: index-pack with 256*1 loose objects      4.31(0.55+0.18)   0.41(0.40+0.02) -90.5%   0.23(0.36+0.01) -94.7%
    0008.3: index-pack with 256*10 loose objects     4.37(0.45+0.21)   0.45(0.40+0.02) -89.7%   0.25(0.38+0.01) -94.3%
    0008.4: index-pack with 256*100 loose objects    4.47(0.53+0.23)   0.67(0.63+0.02) -85.0%   0.24(0.38+0.01) -94.6%
    0008.5: index-pack with 256*250 loose objects    5.01(0.67+0.30)   1.04(0.98+0.06) -79.2%   0.24(0.37+0.01) -95.2%
    0008.6: index-pack with 256*500 loose objects    5.11(0.57+0.21)   1.81(1.70+0.09) -64.6%   0.25(0.38+0.01) -95.1%
    0008.7: index-pack with 256*750 loose objects    5.12(0.60+0.22)   2.54(2.38+0.14) -50.4%   0.24(0.38+0.01) -95.3%
    0008.8: index-pack with 256*1000 loose objects   4.52(0.52+0.21)   3.36(3.17+0.17) -25.7%   0.23(0.36+0.01) -94.9%

I then hacked it to test against git.git, but skipped origin/master for
that one because it takes *ages*. So just mine v.s. yours:

    $ GIT_PERF_REPEAT_COUNT=3 GIT_PERF_MAKE_OPTS='-j56 CFLAGS="-O3"' ./run peff/jk/loose-cache avar/check-collisions-config p0008-index-pack.sh
    [...]
    Test                                             peff/jk/loose-cache   avar/check-collisions-config
    ---------------------------------------------------------------------------------------------------
    0008.2: index-pack with 256*1 loose objects      12.57(28.72+0.61)     12.68(29.36+0.62) +0.9%
    0008.3: index-pack with 256*10 loose objects     12.77(28.75+0.61)     12.50(28.88+0.56) -2.1%
    0008.4: index-pack with 256*100 loose objects    13.20(29.49+0.66)     12.38(28.58+0.60) -6.2%
    0008.5: index-pack with 256*250 loose objects    14.10(30.59+0.64)     12.54(28.22+0.57) -11.1%
    0008.6: index-pack with 256*500 loose objects    14.48(31.06+0.74)     12.43(28.59+0.60) -14.2%
    0008.7: index-pack with 256*750 loose objects    15.31(31.91+0.74)     12.67(29.23+0.64) -17.2%
    0008.8: index-pack with 256*1000 loose objects   16.34(32.84+0.76)     13.11(30.19+0.68) -19.8%

So not much of a practical difference perhaps. But then again this isn't
a very realistic test case of anything. Rarely are you going to push a
history of something the size of git.git into a repo with this many
loose objects.

Using sha1collisiondetection.git is I think the most realistic scenario,
i.e. you'll often end up fetching/pushing something roughly the size of
its entire history on a big repo, and with it:

    Test                                             peff/jk/loose-cache   avar/check-collisions-config
    ---------------------------------------------------------------------------------------------------
    0008.2: index-pack with 256*1 loose objects      0.16(0.04+0.01)       0.05(0.03+0.00) -68.8%
    0008.3: index-pack with 256*10 loose objects     0.19(0.04+0.02)       0.05(0.02+0.00) -73.7%
    0008.4: index-pack with 256*100 loose objects    0.32(0.17+0.02)       0.04(0.02+0.00) -87.5%
    0008.5: index-pack with 256*250 loose objects    0.57(0.41+0.03)       0.04(0.02+0.00) -93.0%
    0008.6: index-pack with 256*500 loose objects    1.02(0.83+0.06)       0.04(0.03+0.00) -96.1%
    0008.7: index-pack with 256*750 loose objects    1.47(1.24+0.10)       0.04(0.02+0.00) -97.3%
    0008.8: index-pack with 256*1000 loose objects   1.94(1.70+0.10)       0.04(0.02+0.00) -97.9%

As noted in previous threads I have an in-house monorepo where (due to
expiry policies) loose objects hover around the 256*250 mark.

The script, which is hacky as hell and takes shortcuts not to re-create
the huge fake loose object collection every time (takes ages). Perhaps
you're interested in incorporating some version of this into a v2. To be
useful it should take some target path as an env variable.

$ cat t/perf/p0008-index-pack.sh
#!/bin/sh

test_description="Tests performance of index-pack with loose objects"

. ./perf-lib.sh

test_perf_fresh_repo

test_expect_success 'setup tests' '
	for count in 1 10 100 250 500 750 1000
	do
		if test -d /mnt/ontap_githackers/repo-$count.git
		then
			rm -rf /mnt/ontap_githackers/repo-$count.git/objects/pack
		else
			git init --bare /mnt/ontap_githackers/repo-$count.git &&
			(
				cd /mnt/ontap_githackers/repo-$count.git &&
				for i in $(seq 0 255)
				do
					i=$(printf %02x $i) &&
					mkdir objects/$i &&
					for j in $(seq --format=%038g $count)
					do
						>objects/$i/$j
					done
				done
			)
		fi
	done
'

for count in 1 10 100 250 500 750 1000
do
	echo 3 | sudo tee /proc/sys/vm/drop_caches
	test_perf "index-pack with 256*$count loose objects" "
		(
			cd /mnt/ontap_githackers/repo-$count.git &&
			rm -fv objects/pack/*;
			git -c core.checkCollisions=false index-pack -v --stdin </home/aearnfjord/g/DBD-mysql/.git/objects/pack/pack-*.pack
		)
	"
done

test_done