Thread (13 messages) flat view 13 messages, 4 authors, 2021-10-01

Re: [PATCH] bus: mhi: pci_generic: increase timeout value for operations to 24000ms

From: Manivannan Sadhasivam <hidden>
Date: 2021-10-01 07:39:03
Also in: linux-arm-msm

On Thu, Sep 30, 2021 at 12:19:48PM +0200, Loic Poulain wrote:
On Thu, 30 Sept 2021 at 10:08, Thomas Perrot [off-list ref] wrote:
quoted
Hello,
[...]
I agree, let's set a conservative high value for generic SDX55, so
have wider support, that can be tuned per vendor IDs if necessary
anyway.
No. Since this device seems to have a dedicated config, let's increase the
timeout only for this device until we get reports for other devices.
Regards,
Loic
quoted
Moreover, Sierra EM919x modems use a custom controller configuration,
we are currently working on it. As our tests not being sufficiently
conclusive, so we have not yet submitted.

Best regards,
Thomas
quoted
quoted
It was derived from testing I believe.
Following your reasoning above, shouldn't this 24000ms timeout be
applied only to the Sierra Wireless EM91xx devices (which may have
custom firmware bits delaying the initialization a bit longer), and
not to the generic SDX24, SDX55 and SDX65?

If I'm not mistaken, Thomas is testing with a custom mhi_pci_generic
entry for the EM91xx; as in
https://forum.sierrawireless.com/t/sierra-wireless-airprime-em919x-pcie-support/24927
.
I'm also playing with that same entry on my own setup, but have other
problems of my own :)


--
Aleksander
https://aleksander.es
--
Thomas Perrot, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help