[PATCH 5.10 111/157] regulator: pca9450: Clear PRESET_EN bit to fix BUCK1/2/3 voltage setting
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date: 2021-03-22 12:59:33
Also in:
lkml
Subsystem:
the rest, voltage and current regulator framework · Maintainers:
Linus Torvalds, Liam Girdwood, Mark Brown
From: Frieder Schrempf <redacted>
[ Upstream commit 98b94b6e38ca0c4eeb29949c656f6a315000c23e ]
The driver uses the DVS registers PCA9450_REG_BUCKxOUT_DVS0 to set the
voltage for the buck regulators 1, 2 and 3. This has no effect as the
PRESET_EN bit is set by default and therefore the preset values are used
instead, which are set to 850 mV.
To fix this we clear the PRESET_EN bit at time of initialization.
Fixes: 0935ff5f1f0a ("regulator: pca9450: add pca9450 pmic driver")
Cc: <redacted>
Signed-off-by: Frieder Schrempf <redacted>
Link: https://lore.kernel.org/r/20210222115229.166620-1-frieder.schrempf@kontron.de (local)
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/regulator/pca9450-regulator.c | 8 ++++++++
include/linux/regulator/pca9450.h | 3 +++
2 files changed, 11 insertions(+)
diff --git a/drivers/regulator/pca9450-regulator.c b/drivers/regulator/pca9450-regulator.c
index 833d398c6aa2..d38109cc3a01 100644
--- a/drivers/regulator/pca9450-regulator.c
+++ b/drivers/regulator/pca9450-regulator.c@@ -797,6 +797,14 @@ static int pca9450_i2c_probe(struct i2c_client *i2c, return ret; } + /* Clear PRESET_EN bit in BUCK123_DVS to use DVS registers */ + ret = regmap_clear_bits(pca9450->regmap, PCA9450_REG_BUCK123_DVS, + BUCK123_PRESET_EN); + if (ret) { + dev_err(&i2c->dev, "Failed to clear PRESET_EN bit: %d\n", ret); + return ret; + } + /* Set reset behavior on assertion of WDOG_B signal */ ret = regmap_update_bits(pca9450->regmap, PCA9450_REG_RESET_CTRL, WDOG_B_CFG_MASK, WDOG_B_CFG_COLD_LDO12);
diff --git a/include/linux/regulator/pca9450.h b/include/linux/regulator/pca9450.h
index ccdb5320a240..71902f41c919 100644
--- a/include/linux/regulator/pca9450.h
+++ b/include/linux/regulator/pca9450.h@@ -147,6 +147,9 @@ enum { #define BUCK6_FPWM 0x04 #define BUCK6_ENMODE_MASK 0x03 +/* PCA9450_REG_BUCK123_PRESET_EN bit */ +#define BUCK123_PRESET_EN 0x80 + /* PCA9450_BUCK1OUT_DVS0 bits */ #define BUCK1OUT_DVS0_MASK 0x7F #define BUCK1OUT_DVS0_DEFAULT 0x14
--
2.30.1