[PATCH 4.14 17/95] net: stmmac: fix incorrect DMA channel intr enable setting of EQoS v4.10
From: gregkh@linuxfoundation.org
Date: 2021-03-15 14:25:03
Also in:
lkml
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
From: Ong Boon Leong <redacted>
commit 879c348c35bb5fb758dd881d8a97409c1862dae8 upstream.
We introduce dwmac410_dma_init_channel() here for both EQoS v4.10 and
above which use different DMA_CH(n)_Interrupt_Enable bit definitions for
NIE and AIE.
Fixes: 48863ce5940f ("stmmac: add DMA support for GMAC 4.xx")
Signed-off-by: Ong Boon Leong <redacted>
Signed-off-by: Ramesh Babu B <redacted>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c | 19 ++++++++++++++++++-
1 file changed, 18 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c@@ -115,6 +115,23 @@ static void dwmac4_dma_init_channel(void ioaddr + DMA_CHAN_INTR_ENA(chan)); } +static void dwmac410_dma_init_channel(void __iomem *ioaddr, + struct stmmac_dma_cfg *dma_cfg, u32 chan) +{ + u32 value; + + /* common channel control register config */ + value = readl(ioaddr + DMA_CHAN_CONTROL(chan)); + if (dma_cfg->pblx8) + value = value | DMA_BUS_MODE_PBL; + + writel(value, ioaddr + DMA_CHAN_CONTROL(chan)); + + /* Mask interrupts by writing to CSR7 */ + writel(DMA_CHAN_INTR_DEFAULT_MASK_4_10, + ioaddr + DMA_CHAN_INTR_ENA(chan)); +} + static void dwmac4_dma_init(void __iomem *ioaddr, struct stmmac_dma_cfg *dma_cfg, u32 dma_tx, u32 dma_rx, int atds)
@@ -416,7 +433,7 @@ const struct stmmac_dma_ops dwmac4_dma_o const struct stmmac_dma_ops dwmac410_dma_ops = { .reset = dwmac4_dma_reset, .init = dwmac4_dma_init, - .init_chan = dwmac4_dma_init_channel, + .init_chan = dwmac410_dma_init_channel, .init_rx_chan = dwmac4_dma_init_rx_chan, .init_tx_chan = dwmac4_dma_init_tx_chan, .axi = dwmac4_dma_axi,