[PATCH 5.10 052/103] ARM: OMAP2+: omap_device: fix idling of devices during probe
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date: 2021-01-15 12:38:06
Also in:
lkml
From: Andreas Kemnade <andreas@kemnade.info>
commit ec76c2eea903947202098090bbe07a739b5246e9 upstream.
On the GTA04A5 od->_driver_status was not set to BUS_NOTIFY_BIND_DRIVER
during probe of the second mmc used for wifi. Therefore
omap_device_late_idle idled the device during probing causing oopses when
accessing the registers.
It was not set because od->_state was set to OMAP_DEVICE_STATE_IDLE
in the notifier callback. Therefore set od->_driver_status also in that
case.
This came apparent after commit 21b2cec61c04 ("mmc: Set
PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.4") causing this
oops:
omap_hsmmc 480b4000.mmc: omap_device_late_idle: enabled but no driver. Idling
8<--- cut here ---
Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa0b402c
...
(omap_hsmmc_set_bus_width) from [<c07996bc>] (omap_hsmmc_set_ios+0x11c/0x258)
(omap_hsmmc_set_ios) from [<c077b2b0>] (mmc_power_up.part.8+0x3c/0xd0)
(mmc_power_up.part.8) from [<c077c14c>] (mmc_start_host+0x88/0x9c)
(mmc_start_host) from [<c077d284>] (mmc_add_host+0x58/0x84)
(mmc_add_host) from [<c0799190>] (omap_hsmmc_probe+0x5fc/0x8c0)
(omap_hsmmc_probe) from [<c0666728>] (platform_drv_probe+0x48/0x98)
(platform_drv_probe) from [<c066457c>] (really_probe+0x1dc/0x3b4)
Fixes: 04abaf07f6d5 ("ARM: OMAP2+: omap_device: Sync omap_device and pm_runtime after probe defer")
Fixes: 21b2cec61c04 ("mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.4")
Acked-by: Ulf Hansson <redacted>
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
[tony@atomide.com: left out extra parens, trimmed description stack trace]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm/mach-omap2/omap_device.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
--- a/arch/arm/mach-omap2/omap_device.c
+++ b/arch/arm/mach-omap2/omap_device.c@@ -230,10 +230,12 @@ static int _omap_device_notifier_call(st break; case BUS_NOTIFY_BIND_DRIVER: od = to_omap_device(pdev); - if (od && (od->_state == OMAP_DEVICE_STATE_ENABLED) && - pm_runtime_status_suspended(dev)) { + if (od) { od->_driver_status = BUS_NOTIFY_BIND_DRIVER; - pm_runtime_set_active(dev); + if (od->_state == OMAP_DEVICE_STATE_ENABLED && + pm_runtime_status_suspended(dev)) { + pm_runtime_set_active(dev); + } } break; case BUS_NOTIFY_ADD_DEVICE: