Re: [PATCH net-next v2 4/4] net: phy: marvell: add RGMII-to-Copper mode configuration

From
Maxime Chevallier <maxime.chevallier@bootlin.com>
Date
2026-11-18 08:20:57
Also in
lkml
Reply to
Paul Louvel, 2026-11-16
Hi Paul,

On 11/16/26 16:27, Paul Louvel wrote:
The driver currently programs the mode only for SGMII-to-Copper, based
on the PHY interface mode.

Some MACs connect to the PHY via RGMII. Add code in
m88e1510_config_init() to configure the device.

Do not overwrite the media interface mode configured via
m88e1510_port_configure_serdes().

Signed-off-by: Paul Louvel (Schneider Electric) <redacted>
FWIW I've tested that on a SGMII-to-Copper 88e1512 PHY, and no regressions
found. I can't test on RGMII though :)

Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>

Maxime
Thread (11 messages) 11 messages, 4 authors, last reply 4h ago
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help