[PATCH net-next v2 1/5] dt-bindings: net: maxlinear: add MxL86211C VDDP supply
flat view
HOTtoday
From: Robert Marko <robert.marko@sartura.hr>
Date: 2026-10-16 11:20:46
Also in:
linux-devicetree, lkml
Subsystem:
networking drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Describe the VDDP supply used by the MxL86211C PHY. Its voltage determines whether the MDIO, MDC, and MDINT pads use 1.8 V or 3.3 V. Select this binding for the MxL86211C PHY ID so the supply requirement is validated. Signed-off-by: Robert Marko <robert.marko@sartura.hr> --- Changes in v2: - Model VDDP as a supply instead of a regulator provider. - Select the schema for the MxL86211C PHY ID. .../bindings/net/maxlinear,gpy2xx.yaml | 49 +++++++++++++++++++ 1 file changed, 49 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/maxlinear,gpy2xx.yaml b/Documentation/devicetree/bindings/net/maxlinear,gpy2xx.yaml
index 8a3713abd1ca9..a0dfb6192d81b 100644
--- a/Documentation/devicetree/bindings/net/maxlinear,gpy2xx.yaml
+++ b/Documentation/devicetree/bindings/net/maxlinear,gpy2xx.yaml@@ -10,10 +10,38 @@ maintainers: - Andrew Lunn <andrew@lunn.ch> - Michael Walle <michael@walle.cc> +select: + properties: + compatible: + contains: + const: ethernet-phy-idc133.5400 + required: + - compatible + allOf: - $ref: ethernet-phy.yaml# + - if: + properties: + compatible: + contains: + const: ethernet-phy-idc133.5400 + required: + - compatible + + then: + required: + - vddp-supply + + else: + properties: + vddp-supply: false properties: + vddp-supply: + description: | + Regulator supplying the VDDP pin. Its voltage configures the MDIO, + MDC, and MDINT pad voltage and must be either 1.8 V or 3.3 V. + maxlinear,use-broken-interrupts: description: | Interrupts are broken on some GPY2xx PHYs in that they keep the
@@ -45,4 +73,25 @@ examples: }; }; + - | + vddp: regulator-vddp { + compatible = "regulator-fixed"; + regulator-name = "vddp"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ethernet { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@0 { + compatible = "ethernet-phy-idc133.5400", + "ethernet-phy-ieee802.3-c45"; + reg = <0>; + vddp-supply = <&vddp>; + + }; + }; + ...
--
2.56.0