[PATCH net-next v2 1/2] dt-bindings: net: qca,qca808x: Add regulator properties
flat view
WARM1d
From: Alex Elder <hidden>
Date: 2026-10-15 14:38:54
Also in:
linux-arm-msm, linux-devicetree, lkml
Subsystem:
networking drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
From: Daniel Thompson <redacted> QCA808x has four different power rails (although in many board designs the different rails share a regulator). Add each of these to the corresponding DT binding as optional supplies. Signed-off-by: Daniel Thompson <redacted> Co-developed-by: Alex Elder <redacted> Signed-off-by: Alex Elder <redacted> --- .../devicetree/bindings/net/qca,qca808x.yaml | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/qca,qca808x.yaml b/Documentation/devicetree/bindings/net/qca,qca808x.yaml
index e2552655902a3..03daef1c7a4e6 100644
--- a/Documentation/devicetree/bindings/net/qca,qca808x.yaml
+++ b/Documentation/devicetree/bindings/net/qca,qca808x.yaml@@ -17,6 +17,8 @@ description: By default this special PIN is set to LED function. + Additionally, up to four power supplies may be separately specified. + allOf: - $ref: ethernet-phy.yaml#
@@ -25,6 +27,18 @@ properties: enum: - ethernet-phy-id004d.d101 + avdd18-supply: + description: 1.8v analog power supply. + + vdd-supply: + description: 1.05v power supply. + + vdd18-supply: + description: 1.8v power supply. + + vdd125-supply: + description: (1.25v to 1.98v) LDO regulator power supply. + unevaluatedProperties: false examples:
@@ -39,6 +53,8 @@ examples: compatible = "ethernet-phy-id004d.d101"; reg = <0>; + vdd18-supply = <&phy_vreg_1v8>; + leds { #address-cells = <1>; #size-cells = <0>;
--
2.53.0