[PATCH net-next v2 01/14] dt-bindings: net: qca,qca808x: Add regulator properties
flat view
STALE73d
From: Alex Elder <hidden>
Date: 2026-06-05 01:00:32
Also in:
bpf, linux-arm-kernel, linux-arm-msm, linux-devicetree, linux-gpio, lkml
Subsystem:
networking drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Revision v2 of 2 in this series.
Revisions (2)
- v1 [diff vs current]
- v2 current
From: Daniel Thompson <redacted> QCA808x has four different power rails (although in many board designs the different rails share a regulator). Add each of these supplies to the corresponding DT binding. Signed-off-by: Daniel Thompson <redacted> Signed-off-by: Alex Elder <redacted> --- .../devicetree/bindings/net/qca,qca808x.yaml | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/qca,qca808x.yaml b/Documentation/devicetree/bindings/net/qca,qca808x.yaml
index e2552655902a3..3c1b7eca33caf 100644
--- a/Documentation/devicetree/bindings/net/qca,qca808x.yaml
+++ b/Documentation/devicetree/bindings/net/qca,qca808x.yaml@@ -25,6 +25,18 @@ properties: enum: - ethernet-phy-id004d.d101 + avdd18-supply: + description: 1.8v analog power supply. + + vdd-supply: + description: 1.05v power supply. + + vdd18-supply: + description: 1.8v power supply. + + vdd125-supply: + description: (1.25v to 1.98v) LDO regulator power supply. + unevaluatedProperties: false examples:
@@ -39,6 +51,8 @@ examples: compatible = "ethernet-phy-id004d.d101"; reg = <0>; + vdd-supply = <&phy_vreg_1v8>; + leds { #address-cells = <1>; #size-cells = <0>;
--
2.51.0