[PATCH net-next v8 15/15] ax88796b: Add support for AX88772D, AX88179A and AX88279

@@ -13,6 +13,19 @@
 #define PHY_ID_ASIX_AX88772A		0x003b1861
 #define PHY_ID_ASIX_AX88772C		0x003b1881
 #define PHY_ID_ASIX_AX88796B		0x003b1841
+#define PHY_ID_ASIX_AX88772D		0x003b772d
+#define PHY_ID_ASIX_AX88179A		0x003b179a
+#define PHY_ID_ASIX_AX88279		0x003b2790
+
+#define AX_ADVERTISE_2500		0x1000
+
+/* MII Vendor registers */
+#define AX_CTRL_STATUS			0x1d
+#define AX_CTRL_STATUS_SPEED_MASK	0x0c
+#define   AX_CTRL_STATUS_SPEED_10	0x0
+#define   AX_CTRL_STATUS_SPEED_100	0x4
+#define   AX_CTRL_STATUS_SPEED_1000	0x8
+#define   AX_CTRL_STATUS_SPEED_2500	0xc
 
 MODULE_DESCRIPTION("Asix PHY driver");
 MODULE_AUTHOR("Michael Schmitz <schmitzmic@gmail.com>");

@@ -83,6 +96,122 @@ static int asix_ax88772a_read_status(struct phy_device *phydev)
 	return 0;
 }
 
+static int asix_ax88279_read_status(struct phy_device *phydev)
+{
+	int ret, val;
+
+	ret = genphy_read_status(phydev);
+	if (ret)
+		return ret;
+
+	/* Read actual speed from vendor register */
+	val = phy_read(phydev, AX_CTRL_STATUS);
+	switch (val & AX_CTRL_STATUS_SPEED_MASK) {
+	case AX_CTRL_STATUS_SPEED_2500:
+		phydev->speed = SPEED_2500;
+		break;
+	case AX_CTRL_STATUS_SPEED_1000:
+		phydev->speed = SPEED_1000;
+		break;
+	case AX_CTRL_STATUS_SPEED_100:
+		phydev->speed = SPEED_100;
+		break;
+	case AX_CTRL_STATUS_SPEED_10:
+		phydev->speed = SPEED_10;
+	}
+
+	/* MDIO_AN_10GBT_STAT_LP2_5G is broken, but we can deduce that
+	 * the link-partner advertised 2500M if remotely AN succceded
+	 * for link speed > 1000M and we locally have a link speed of
+	 * 2500M
+	 */
+	val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_STAT);
+	if (val >= 0 && val & MDIO_AN_10GBT_STAT_REMOK) {
+		linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
+				 phydev->lp_advertising,
+				 phydev->speed == SPEED_2500);
+	}
+	/* Only supports full duplex */
+	phydev->duplex = DUPLEX_FULL;
+
+	/* PHY switches interface between 2.5GBit and slower modes */
+	if (phydev->speed == SPEED_2500)
+		phydev->interface = PHY_INTERFACE_MODE_2500BASEX;
+	else
+		phydev->interface = PHY_INTERFACE_MODE_SGMII;
+
+	return 0;
+}
+
+static int asix_ax88279_config_aneg(struct phy_device *phydev)
+{
+	bool adv_2500;
+	int ret;
+
+	if (phydev->autoneg == AUTONEG_DISABLE) {
+		phydev_warn(phydev, "Disabling autoneg is not supported\n");
+		return -EOPNOTSUPP;
+	}
+
+	ret = genphy_config_aneg(phydev);
+
+	if (ret < 0)
+		return ret;
+
+	adv_2500 = linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->advertising);
+	ret = phy_modify(phydev, MII_ADVERTISE, AX_ADVERTISE_2500,
+			 adv_2500 ? AX_ADVERTISE_2500 : 0);
+
+	return ret;
+}
+
+static int asix_ax88279_get_features(struct phy_device *phydev)
+{
+	int ret;
+
+	/* MDIO_DEVS1/2 empty, so set mmds_present bits to allow reading abilities */
+	phydev->c45_ids.mmds_present |= MDIO_DEVS_PMAPMD | MDIO_DEVS_AN;
+
+	linkmode_set_bit_array(phy_basic_ports_array, ARRAY_SIZE(phy_basic_ports_array),
+			       phydev->supported);
+
+	ret = genphy_c45_pma_read_abilities(phydev);
+	if (ret < 0)
+		return ret;
+
+	/* AX88279 does not support reported 100baseT-half duplex mode */
+	linkmode_clear_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT, phydev->supported);
+
+	return 0;
+}
+
+static int asix_ax88279_config_init(struct phy_device *phydev)
+{
+	__set_bit(PHY_INTERFACE_MODE_2500BASEX, phydev->possible_interfaces);
+	__set_bit(PHY_INTERFACE_MODE_SGMII, phydev->possible_interfaces);
+
+	return 0;
+}
+
+/* AX88179A-based PHYs cannot access MMD registers via MII_MMD_CTRL/MII_MMD_DATA
+ * Make sure to use c45 access instead.
+ */
+static int asix_read_mmd(struct phy_device *phydev, int devnum, u16 reg)
+{
+	struct mii_bus *bus = phydev->mdio.bus;
+	int addr = phydev->mdio.addr;
+
+	return __mdiobus_c45_read(bus, addr, devnum, reg);
+}
+
+static int asix_write_mmd(struct phy_device *phydev, int devnum, u16 reg, u16 val)
+{
+	struct mii_bus *bus = phydev->mdio.bus;
+	int addr = phydev->mdio.addr;
+
+	return __mdiobus_c45_write(bus, addr, devnum, reg, val);
+}
+
 static void asix_ax88772a_link_change_notify(struct phy_device *phydev)
 {
 	/* Reset PHY, otherwise MII_LPA will provide outdated information.

@@ -94,6 +223,25 @@ static void asix_ax88772a_link_change_notify(struct phy_device *phydev)
 	}
 }
 
+static int asix_ax88772D_get_features(struct phy_device *phydev)
+{
+	int ret;
+	__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = {};
+
+	/* MDIO_DEVS1/2 empty, so set mmds_present bits to allow reading abilities */
+	phydev->c45_ids.mmds_present |= MDIO_DEVS_PMAPMD | MDIO_DEVS_AN;
+
+	ret = genphy_read_abilities(phydev);
+	if (ret < 0)
+		return ret;
+
+	/* AX88772D does not support reported 1000baseT mode */
+	linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT, mask);
+	linkmode_andnot(phydev->supported, phydev->supported, mask);
+
+	return 0;
+}
+
 static struct phy_driver asix_driver[] = {
 {
 	PHY_ID_MATCH_EXACT(PHY_ID_ASIX_AX88772A),

@@ -111,6 +259,35 @@ static struct phy_driver asix_driver[] = {
 	.suspend	= genphy_suspend,
 	.resume		= genphy_resume,
 	.soft_reset	= asix_soft_reset,
+}, {
+	PHY_ID_MATCH_EXACT(PHY_ID_ASIX_AX88772D),
+	.name		= "Asix Electronics AX88772D",
+	.flags		= PHY_IS_INTERNAL,
+	.get_features	= asix_ax88772D_get_features,
+	.read_mmd	= asix_read_mmd,
+	.write_mmd	= asix_write_mmd,
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
+}, {
+	PHY_ID_MATCH_EXACT(PHY_ID_ASIX_AX88179A),
+	.name		= "Asix Electronics AX88179A",
+	.flags		= PHY_IS_INTERNAL,
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
+	.read_mmd	= asix_read_mmd,
+	.write_mmd	= asix_write_mmd,
+}, {
+	PHY_ID_MATCH_EXACT(PHY_ID_ASIX_AX88279),
+	.name		= "Asix Electronics AX88279",
+	.flags		= PHY_IS_INTERNAL | PHY_BROKEN_FORCED,
+	.get_features	= asix_ax88279_get_features,
+	.read_status	= asix_ax88279_read_status,
+	.config_aneg	= asix_ax88279_config_aneg,
+	.config_init	= asix_ax88279_config_init,
+	.read_mmd	= asix_read_mmd,
+	.write_mmd	= asix_write_mmd,
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
 }, {
 	PHY_ID_MATCH_MODEL(PHY_ID_ASIX_AX88796B),
 	.name		= "Asix Electronics AX88796B",

@@ -124,6 +301,9 @@ static const struct mdio_device_id __maybe_unused asix_tbl[] = {
 	{ PHY_ID_MATCH_EXACT(PHY_ID_ASIX_AX88772A) },
 	{ PHY_ID_MATCH_EXACT(PHY_ID_ASIX_AX88772C) },
 	{ PHY_ID_MATCH_MODEL(PHY_ID_ASIX_AX88796B) },
+	{ PHY_ID_MATCH_EXACT(PHY_ID_ASIX_AX88772D) },
+	{ PHY_ID_MATCH_EXACT(PHY_ID_ASIX_AX88179A) },
+	{ PHY_ID_MATCH_EXACT(PHY_ID_ASIX_AX88279) },
 	{ }
 };