[PATCH net-next v6 5/5] ARM: dts: aspeed: ast2600-evb: Configure RGMII delay for MAC

From
Jacky Chou <jacky_chou@aspeedtech.com>
Date
2026-03-10 06:14:57
Also in
linux-arm-kernel, linux-aspeed, linux-devicetree, lkml
Reply to
Andrew Lunn, 2026-03-06
quoted
Could you please help confirm how we should proceed with this project?
That is up to you.

If you do lots of small patches with good comments, you probably can do it in
Linux. But you need to convince reviewers you are not breaking backwards
compatibility.

I think the bootloader change is simpler. But i've not worked on bootloaders for
a long time.
quoted
3. Send a patch to correct the phy-mode settings in
aspeed-ast2600-evb.dts so that they match the bootloader after the fix.

mac0: "rgmii-rxid" -> "rgmii-id"
mac1: "rgmii-rxid" -> "rgmii-id"
mac2: "rgmii" -> "rgmii-id"
mac3: "rgmii" -> "rgmii-id"
You will do this anyway. However, just so that backwards comparability gets
tested all the time, i would suggest you only change mac0 and mac3. Leave
mac1 and mac2 with old settings, and add comments that old values are being
used for testing, and they should not be cut/paste into new .dts files. And add a
comment that mac0 and mac3 require the new bootloader, if you decide to
solve it that way.
Thank you for your patience and for the detailed guidance.

I will discuss the possible approaches internally with the team and decide on the 
direction for the fix. 
Thanks again for your feedback.

Thanks,
Jacky
Thread (21 messages) 21 messages, 2 authors, last reply 2026-03-10
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help