Hi Raju,
On 04/03/2026 13:23, Raju Rangoju wrote:
When operating in 10GBASE-KR mode with auto-negotiation disabled and RX
adaptation enabled, CRC errors can occur during the RX adaptation
process. This happens because the driver continues transmitting and
receiving packets while adaptation is in progress.
Fix this by stopping TX/RX immediately when the link goes down and RX
adaptation needs to be re-triggered, and only re-enabling TX/RX after
adaptation completes and the link is confirmed up. Introduce a flag to
track whether TX/RX was disabled for adaptation so it can be restored
correctly.
This prevents packets from being transmitted or received during the RX
adaptation window and avoids CRC errors from corrupted frames.
Fixes: 4f3b20bfbb75 ("amd-xgbe: add support for rx-adaptation")
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Small nit on my side :
[...]
quoted hunk ↗ jump to hunk
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe.h b/drivers/net/ethernet/amd/xgbe/xgbe.h
index 4333d269ee84..75c021b38a28 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe.h
+++ b/drivers/net/ethernet/amd/xgbe/xgbe.h
@@ -1266,6 +1266,10 @@ struct xgbe_prv_data {
bool en_rx_adap;
int rx_adapt_retries;
bool rx_adapt_done;
+ /* Flag to track if data path (TX/RX) was stopped for RX adaptation.
+ * This prevents packet corruption during the adaptation window.
+ */
+ unsigned int rx_adapt_data_path_stopped;
This is only ever set as true/false, maybe make it a bool ?
bool mode_set;
bool sph;
};
Maxime