Re: [PATCH net-next v2 2/3] net: stmmac: Add glue driver for Motorcomm YT6801 ethernet controller

On Tue, Nov 11, 2025 at 10:52:51AM +0000, Yao Zi wrote:

+	plat->bus_id		= pci_dev_id(pdev);
+	plat->phy_addr		= -1;
+	plat->phy_interface	= PHY_INTERFACE_MODE_GMII;
+	plat->clk_csr		= STMMAC_CSR_20_35M;

Could you include a comment indicating what the stmmac clock rate
actually is (the rate which is used to derive this divider) ? As
this is PCI, I'm guessing it's 33MHz, which fits with your divider
value.

Thanks.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!